Jump to content
SAU Community

Turbo Gaskets/washers, Help Needed

hardsteppa
 Share

Recommended Posts

hardsteppa Grand Master

hardsteppa

Posted
Posted

Yo. in the process of changing turbos (stock), need a couple of pointers pls. The turbo drain gasket, would it be ok to cut another out of ACL oil joiner gasket paper, or does it need to be some special gasket material to handle the high temps I'm guessing it will cop due to being on the turbo? as in, paper is probably going to overheat and catch alight and burn my car to the ground which is not what i'm after. Also where the hell do u buy copper washers from? Went to a few auto and bolt stores, and could only find those crappy prepacked ones that were all wrong sizes. Nissan wanted 36 bucks for SIX copper washers (get the farrrrk out)...

Link to comment
https://www.sau.com.au/forums/topic/399897-turbo-gasketswashers-help-needed/
Share on other sites
kudos.motorsports Grand Master

kudos.motorsports

Posted
Posted

Hi Andy,

I know it may not be exactly what you're after however I can offer you a genuine Nissan RB25DET turbo gasket kit, pictured below, for $88.00 delivered.

Regards,

Andrew Sullivan

Kudos Motorsports

Genuine-Nissan-Gasket-Kit-Turbo-14401-21U25-14401-21U26-Nissan-Skyline-R33-GTS-25-t-R34-25GT-t-RB25DET-Neo-6.jpg

AngryRB Grand Master

AngryRB

Posted
Posted

Yo. in the process of changing turbos (stock), need a couple of pointers pls. The turbo drain gasket, would it be ok to cut another out of ACL oil joiner gasket paper, or does it need to be some special gasket material to handle the high temps I'm guessing it will cop due to being on the turbo? as in, paper is probably going to overheat and catch alight and burn my car to the ground which is not what i'm after. Also where the hell do u buy copper washers from? Went to a few auto and bolt stores, and could only find those crappy prepacked ones that were all wrong sizes. Nissan wanted 36 bucks for SIX copper washers (get the farrrrk out)...

i dont think the turbo drain will catch fire, it is connected to the core which has coolant running thru it, so use the paper based one, its the dump that you dont use a paper one, its a soft alloy of metal i believe, should be able to get copper washers from a bolts shop, even a place like diesel spares would stock that stuff, the kudos package looks like what you need and at good price and good to deal with too. ;)

hardsteppa Grand Master

hardsteppa

Posted
  • Author
Posted

thanks for the offer Kudos, I have ordered from you before and your service and prices is top-rated and quite precise, I would not feel bad being taken by you in the shower if we were in prison together. Just that I am now unemployed and trying to do this shizz as cheap as possible as I have no work, although I was thinking of advertising as a transporter if anyone wants any cargo moved...no questions asked or answered.

and to the other dude, I know i should be able to get that from a bolt shop right? and it was doing my head in, everyone saying nahh mate, don't have any....I'm like why you holding out with the copper, just give it up dude, bring it in with my sizes n shit. Seriously wouldn't mechanics n that being needing copper washers on a daily basis, and in more than just 6 prepacked imperial sizes, come on get with the metric system. So would like to know where the copper washer warehouse is that I am completely unaware of. But I have taken certain liberties with a quiet friday night and the paper gasket I cut out, and pulled out the high temp copper gasket goo and smeared a thin coat of it over the paper gasket I carefully constructed and have it hanging up to dry. Booyah in the morning I have a heat proofed gasket ready to go.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • turbo76lx
      Torana Lx Gtr Hatch, Lots Of Pictures

      By turbo76lx · Posted

      Things are happening.  
    • The Bogan
      NC MX5

      By The Bogan · Posted

      The spray cans were in the "Kiln" room whilst I was preping the parts,  so probably around 2 hours to get them warmed up, the kiln room has 3 small ovens running at 100°c, 3 medium sized ovens running 100°c, and the large one I used running at 80°c, the room itself was about 28°c, I also spent a bit of time taping up the parts in the room as well, and by the time I was done I would assume that the parts were around that 28°c As for power, I expect a couple of Killerwasps up high would be achievable with the current mods, I'm still running the MZR 2.0 intake and throttle body, and there is a slight mismatch with the 2.0 intake (smaller) and 2.5 intake ports (larger) on the head, this intake is matched and specifically designed to fix this issue with the ports mismatch, the throttle body is also a couple of mm larger, OEM is 65mm, the Bosch is 68mm In the end it will look "prettier" than the molded plastic thing that is the OEM MZR 2.0 intake As for the LSD, it's the OEM Torsen which works fine for what I use the car for, plus, basically no maintenance apart from the occasional oil change
    • Pac
      The New Official S A U - N S W Spotted Thread

      By Pac · Posted

      I was at Tunehouse in Marrickville (great team over there really know their VR's) , and I spotted this Very clean R35.  
    • Pac
      Who has a Infiniti Q60, Q50 (V37)?

      By Pac · Posted

      Mate , I have the same issue right now with the exhaust noise , if you can tell me what your local guy did , I'll talk to my guys and see if they can do the same. Power is good but it just too loud when put it down. 
    • Komdotkom
      NC MX5

      By Komdotkom · Posted

      The other trick I've found with wrinkle black is to put the can in hot water for a bit to warm the paint up, and to pre-heat whatever you're painting. It'll be interesting to see if you pick up any power with the intake, following with interest. Got a proper lsd for this?
×
×
  • Create New...