Jump to content
SAU Community

Recommended Posts

As a member of SAU with an HR31 and as the organiser of this day for HSV and NSCC, we now have 10 spots allocated to SAU for this day, which is almost full.

I have spoken with Eric and he is all for us offering this to you as he says many of you have never been to EC and this North Track has been made especially for Skylines (refer attached diag)!

Details and an 'email entry' and 'payment options' docs are attached. I can only give you a week (midnight next Thur) to email me your entry then whatever spots are left will revert back to HSV and NSCC as we will be more than full by then. Any more than 10 will go on a standby list. Please read the Supp Regs doc, which will give you full details of who is running the day, the format, timings, safety requirements etc.

Either post up or email me any queries.

Look forward to meeting some of you on the day.

Brett

North Circuit EC.pdf

Drive Day Supp Regs (Final) - EC_02Jun12.doc

DD2 Payment Options.doc

Drive Day Entry Form DD2 2012.doc

Well im going and i have signed up at least two other SAU peeps, with a third about to confirm his.

That leaves about 7 places left.

Im in the NSCC as well and these guys run an awesome track day, always a quick turn around of the groups to get you straight back out on the track and no stuffing around in the morning. Its all about maximum enjoyment of your car in perfect conditions.

K go!

Too little time to organise to get there for me, but the track looks very fast.

Maybe the HSV and NSCC clubs would like to attend the track day in Canberra on this Saterday, looks like lot of spaces left.

bit late for that, looks like we are getting a late rush on sutton road anyway. Hopefully can do another one day!

yeah Eastern will be mega fast, lots of room for skylines to stretch their legs. Going to be 8 or so groups of cars, ten minutes each group. Going from 9 am to 5pm so plenty of time i guess, plus a lot of the HSVs will have broken down by lunch..

:ph34r:

from what i have seen in vids and at the drift days it looks pretty epic. 2 straights, a few big looping corners, what more can you ask for?

(until the GP track is done of course)

With the track like that (I'm no expert) it should keep the emos and wrecksies in line, its only a couple of more corners than a oval.

Would be good for a HP RWD car with good driver, I've got the car but my balls are to small to go as fast as the car could take me.

just realised the fees not front and centre weevil

$210 for non HSV or NSCC members, 190 for members but how many folks in here other than brett and i pay forty bucks a yr to more than one club? I do it coz two track days a year just aint enough...living life. One minute and 12 or so seconds at time brah..

lol @ wrecksies and emos MLR, yeah we should make short work of them. I like to think im ballsy enough to find the limits of my 33 on the straight, corners are going to be ...interesting.

^ nice

not sure about 210 being that much, track costs about as much to hire as it did when it was the full circuit and i dont remember paying less than 300 very often. Its only really missing 4 or so corners compared to back in the day and has a longer second straight now, looking forward to it big time!



  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...