Jump to content
SAU Community

Rb30/25

RBert

By RBert,
in Western Australia

 Share

Recommended Posts

RBert Enthusiast

RBert

Posted
Posted

Hey all so I'm getting more and more interested in the rb30/25 over just a 25

buttttt, I highly doubt I could build one myself but what other options do I have?

I'd rather it be made in WA so I Don't have to get it shipped.

How much am i looking at cost wise?

I'm getting an RB25 complete engine in the coming weeks, and initially it will

be on an engine stand till i decide what to do with it.

lastly the engine will be going into my R32 which I'm planning to use on the street

and take it to a few drift prac nights, I've been told the 30/25 can be a bit overkill

but the added tourqe and response would go nicely.

Any help would be greatly appreciated.

:action-smiley-069:

Link to comment
https://www.sau.com.au/forums/topic/400491-rb3025/
Share on other sites
StevenCJR31 Veteran

StevenCJR31

Posted
Posted

I doubt there would be an "off the shelf" 30/25 ready to go as everyone has there own slant as to comp ratio, piston type,restrictor size,bearing type/brand etc that they would put into thier engine,ie every 30/25 built is custom made

Link to comment
https://www.sau.com.au/forums/topic/400491-rb3025/#findComment-6362766
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • r32-25t
      Rb26/30 build

      By r32-25t · Posted

      You’ll want to have the block drilled and tapped to suit 1/2in head studs and the head for the same. How much power do you intend to make?
    • hoodedreeper
      Chris' R34 GTT Series 2

      By hoodedreeper · Posted

      Sorry for resurrecting an oldish thread Not much has happened in the past year since the last update. The car did another 1000 miles or so and failed the MOT for the first time in October (failed on tyres which had been advised for a couple of years) In October the car got put up for sale and was removed in November due to no interest, being so close to christmas it was to be expected. The roads were dry in February so I decided to tax it early and get the new tyres fitted.   Fast forward to April, I got someone in to give the car a good clean after sitting for the winter.                                 The car got re-advertised and today (Saturday 3rd May) the car sold. The new owner is planning a GTR conversion at some point and a respray in the same pearl white. It's bitter sweet, it's a shame to have the car sit there for half the year and then only do 1000 miles. The kids are growing too quick and space in the back is getting limited. It's been a great 6.5 years of ownership
    • MBS206
      Rb26/30 build

      By MBS206 · Posted

      And if you want more power, more reliably, and cheaper, go get the Aussie RB... The 4L Barra and put that in instead.
    • MBS206
      Nismo rear spats

      By MBS206 · Posted

      No cats will keep discolouring the rear bar. Sends white paint a weird yellow stain. Cut and polish normally gets it out, but you'll be doing that every fortnight I found.
    • Butters
      Rb26/30 build

      By Butters · Posted

      Both heads will be equally reliable or unreliable depending on what you do to them.  Stock the RB26 head will flow more. You have access to the stock intake ITB manifold on the RB26 cheaply which flows really well(1000hp+).   Arguably more aftermarket support for RB26, though in Aus we love our RB30 SOHC heads too.    The only downsides to the RB26 head is if you have a VL commodore and want to keep the SOHC look.  Where you may have an issue is drilling out the rb30 block for the bigger head studs but if you are building a big power motor you'd probably put bigger studs on the SOHC head too.  This is just about finding a good machine shop, sometimes easier said than done.  RB30 head worked can make big power just like a Rb26 head, so really it actually more comes down to what your preference is for your car.  People now even making billet versions of both.
×
×
  • Create New...