Jump to content
SAU Community

Recommended Posts

Staying blue , the door jams are blue and i cbf painting all of it :) . I swapped another 25 turbo on it today , it has the same bloody noise , so im just going to register it and change the whole induction setup , im putting all the goodies from the cefiro on it so it should see Atleast 250rwk , might even go for a ethanol setup since it will be used on the track mainly . I also put new coilovers in and bought some 33 gtr rims which i plan on using instead of the buddy clubs :) . Now i just need to pick up a bonnet and she will be ready for rego!

No luck fixing the turbo , started it with just the housing on and it was noisy , took the housing off and it was all good , put the other housing i had spare on with no piping all good , put the piping back on and the noise was back . So i won't be making the drift practice in a fortnight , rego next week then td06 etc may aswell go on and see if that fixes it! . Also tried to put some subframe bushes in but someone has over tightened the nuts that hold it up , with all the proper stuff i still managed to round the nut off so i gave up for the afternoon! . Another point of interest for me was , whilst it was on the hoist i noticed it had excessive movement in the right rear wheel , but im not looking into it until Friday 13 is over!.

Yeah i still haven't worked out the image thing , you're quite welcome to explain lol

So you need to sign up for one of their accounts.

Only takes a few seconds.

Then once you log in and upload the image.

You have to use the "Direct Link" URL they have as an option.

Then come here and click on that little picture thing

Its just below the smile face when you are creating a post.

and paste the link in there.

Done :)

**unless you are on a phone and then ur f**ked

  • 2 weeks later...
  • 5 months later...

It's been a little while since i updated this thread , mainly because of this:

post-20231-0-06900600-1357820764_thumb.jpg

State champ for 2012 yiew!!

Anyways , back onto skyline stuff . I have saved and bought a whole sh*t load of stuff to fit to this thing, list goes:

Td06sl2-20g 8cm kando (trust copy)

no name - ebay looking , high mount manifold (not sure i want to use this tbh)

Z32 afm

Power fc

gtr injectors

adj castor rods

rack spacers

oil cooler

r33 front lca's

adjustable upper control arms

2 way diff (pinched out of my cefiro)

R33 gearbox

rear pods for some rice

adj cam gears that i probably won't fit

some old skool guages (omori/greddy etc)

de-cat

gtr seats (which i might not use yet , i think my ceff would love them)

and a few panels and other bits and pieces.

I've finally been allowed to take holidays from work so it's time for me to do some work to it!!

so far i have fitted a new bonnet to it , rear bar and put most of the trim i pulled apart back together

pics:

post-20231-0-42074000-1357821837_thumb.jpg

post-20231-0-26105500-1357821844_thumb.jpg

post-20231-0-16647800-1357821850_thumb.jpg

post-20231-0-73985200-1357821853_thumb.jpg

ready for rego now! , all i need is the $$ to pay for it , then it's game on for getting all the goodies fitted , fingers crossed it will be ready for the Feb 9 drift practice! (although i don't think i will quite have the time )

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...