Jump to content
SAU Community

Recommended Posts

Hey sau tried searching for an answer to try and avoid hassle but with no avail,

As topic states i would have my my foot to the floor and once 3k is passed it revs to redline like crazy but without the boost to go along with it.

Is this boost creep or is it somfin else?

Need some advice sau?

Ive got a hdi electronic boost controller with hdi

solenoid on 11.5 psi if this helps.

Cheers

I was really hoping it wasnt gonna be that, ive got a heavy duty exedy on it figuring that would last but i guess i will have to get a new one , and yes it does grab on 1st gear fine but once second and third or so on is in it just slips , i was driving it again this arvo and i found that if i slowly moved upto 3k it seems to grab on but then the next gear just slips anyway,

Thanks for the advice guys

Definitely clutch mate. Luckily you've got a 33 so it should have a push type clutch, cheaper to buy and much easier to change. If you can do it yourself then you can probably do it in about 2-3 hours on your shed floor with the help of a mate.

Yeh i might have to do it myself , will i need to change the flywheel while im at it or can i keep the stock one on and just change the clutch itself? Will be going through the clutch threads on here On a good and cheap one.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Resizing injectors in Nistune can be done a couple of ways, and there are a couple of ways that you can make a mess of it. The tuner needs to be really aware of the effects of whichever approach he uses (either K, or TIM). They are both easy enough to "get the injector size right" to run the engine. But little details like old start enrichment and hot start are affected differently, depending on which boxes you check.
    • Pretty safe to say almost everyone that has tuned their own car has experienced this issue. The difference being that we have our laptop in the car and when it happens, it's literally 10 seconds of tuning to sort it.  Would you be happy to plug in your laptop and sort this yourself? It is a very simple process and there is no risk of harming your engine (if you are worried about that). 
    • Yeah thats the next step now, either they wil or i will take out for a drive to work and go straight their after work and see is we get the same issues 🤞  thought i try my luck here too, never know someone else might have had the same issue but thanks for the reply 
    • Basically your tuner needs to drive it for the 30 min (or whatever) to create the same conditions then check the ECU settings and sensors at that time. They may not be excited to because that takes them 30 min rather than just opening the bonnet and seeing the problem straight away.... Hot start is generally not as tricky as cold start, but there would be a table for fuel enrichment vs coolant temp as a starting point
    • Yeah, they all cant say anything for sure as everything is working fine . Said unable to find an issue untill it stops again. Could mist likely be CAS wiring or IAS valve issue but again not 100%
×
×
  • Create New...