Jump to content
SAU Community

Recommended Posts

Got a 1996 R33 GTST Automatic which im wrecking. Car had 147,000km showing on the odometer. All parts are in good working condition unless otherwise stated.

RB25DET Complete engine including all ancillaries. Was running fine before the car was involved in an accident. Only modifications were a 3" turbo back exhaust and pod filter. Was running through an automatic transmission. $1350

http://i160.photobucket.com/albums/t177/Shano3000/P1020474.jpg

http://i160.photobucket.com/albums/t177/Shano3000/P1020475.jpg

http://i160.photobucket.com/albums/t177/Shano3000/P1020476.jpg

Automatic transmission with torque converter and flex plate. Perfect working condition. - $150

http://i160.photobucket.com/albums/t177/Shano3000/P1020473.jpg

Engine wiring loom and computer - $220

http://i160.photobucket.com/albums/t177/Shano3000/P1020456.jpg

Rear subframe with diif / axels / Hubs / Hicas / Suspension - $250

http://i160.photobucket.com/albums/t177/Shano3000/P1020485.jpg

Boot lid with series 2 spoiler - $120

http://i160.photobucket.com/albums/t177/Shano3000/P1020465.jpg

Standard wheels. 2 tyres are in as new condition, 2 tyres are it the wear indicators - $200

http://i160.photobucket.com/albums/t177/Shano3000/P1020467.jpg

http://i160.photobucket.com/albums/t177/Shano3000/P1020466.jpg

3" Catback exhaust. Has small hole where pipe meets muffle at the end, easily repaired - $70

http://i160.photobucket.com/albums/t177/Shano3000/P1020483.jpg

http://i160.photobucket.com/albums/t177/Shano3000/P1020484.jpg

Factory plastic side skirts. Have some scratches on the underneath of the passenger side and a crack at the end of the drivers side - $100

http://i160.photobucket.com/albums/t177/Shano3000/P1020468.jpg

http://i160.photobucket.com/albums/t177/Shano3000/P1020470.jpg

Left and right rear tail lights - $30 each

http://i160.photobucket.com/albums/t177/Shano3000/P1020461.jpg

http://i160.photobucket.com/albums/t177/Shano3000/P1020460.jpg

Rear bar. Paint has peeled off on corner of passenger side - $80

http://i160.photobucket.com/albums/t177/Shano3000/P1020452.jpg

http://i160.photobucket.com/albums/t177/Shano3000/P1020453.jpg

Drivers side headlight. Plastic lens has a little fatigue but works perfect. - $150

http://i160.photobucket.com/albums/t177/Shano3000/P1020451.jpg

Series 2 interior dash surround - $100

http://i160.photobucket.com/albums/t177/Shano3000/P1020444.jpg

Series 2 steering wheel. Airbag center removed. - $60

http://i160.photobucket.com/albums/t177/Shano3000/P1020440.jpg

Factory side mount intercooler and piping. Everything included. - $80

http://i160.photobucket.com/albums/t177/Shano3000/P1020438.jpg

Front and rear stock suspension struts - $150

http://i160.photobucket.com/albums/t177/Shano3000/P1020436.jpg

Power steering rack - $100

http://i160.photobucket.com/albums/t177/Shano3000/P1020434.jpg

BM44 Brake master cylinder with booster - $80

http://i160.photobucket.com/albums/t177/Shano3000/P1020432.jpg

http://i160.photobucket.com/albums/t177/Shano3000/P1020433.jpg

Drivers side power window switches and surround - $120

http://i160.photobucket.com/albums/t177/Shano3000/P1020430.jpg

Climate control unit - $40

http://i160.photobucket.com/albums/t177/Shano3000/P1020428.jpg

Passenger seat - $70

http://i160.photobucket.com/albums/t177/Shano3000/P1020426.jpg

Rear seats - $70

http://i160.photobucket.com/albums/t177/Shano3000/P1020425.jpg

Drivers door. Has small area where paint has bubbled. Doesn't include lock or door card - $50

http://i160.photobucket.com/albums/t177/Shano3000/P1020421.jpg

http://i160.photobucket.com/albums/t177/Shano3000/P1020423.jpg

Passenger door. Doesn't include lock, door card or mirror - $50

http://i160.photobucket.com/albums/t177/Shano3000/P1020419.jpg

Series 2 interior door cards and back sides - $50

http://i160.photobucket.com/albums/t177/Shano3000/P1020417.jpg

Drivers side front fender - $70

http://i160.photobucket.com/albums/t177/Shano3000/P1020416.jpg

Passengers side front fender - $70

http://i160.photobucket.com/albums/t177/Shano3000/P1020413.jpg

Front brakes. Good working condition, pads and disks are about 50% worn. - $250

http://i160.photobucket.com/albums/t177/Shano3000/P1020407.jpg

Rear brakes. Good working condition, pads are low and disks may need machining before use - $150

http://i160.photobucket.com/albums/t177/Shano3000/P1020406.jpg

Complete lock set. Ignition, doors and boot locks with original skyline key - $150

http://i160.photobucket.com/albums/t177/Shano3000/P1020403.jpg

Passenger window switch - $30

http://i160.photobucket.com/albums/t177/Shano3000/P1020010.jpg

Space saver spare wheel - $50

http://i160.photobucket.com/albums/t177/Shano3000/P1020006.jpg

Front hubs. 5 stud. $60

http://i160.photobucket.com/albums/t177/Shano3000/P1010949.jpg

Castor rods with urethane bushes - $30 each

http://i160.photobucket.com/albums/t177/Shano3000/P1010934.jpg

Radiator. Aftermarket of somesort. In as new condition. - $100

http://i160.photobucket.com/albums/t177/Shano3000/P1010937.jpg

Aircon condensor. As new condition.- $50

http://i160.photobucket.com/albums/t177/Shano3000/P1010935.jpg

Airbag dashpad. - $100

http://i160.photobucket.com/albums/t177/Shano3000/P1010930.jpg

Automatic selector - $40

http://i160.photobucket.com/albums/t177/Shano3000/P1020458.jpg

Pioneer headunit and 4 channel amp - $150

http://i160.photobucket.com/albums/t177/Shano3000/P1020454.jpg

http://i160.photobucket.com/albums/t177/Shano3000/P1020471.jpg

Factory jack to fit in boot. - $40

http://i160.photobucket.com/albums/t177/Shano3000/P1020462.jpg

Lower control arms / LCA's. - $80 each

http://i160.photobucket.com/albums/t177/Shano3000/P1020482.jpg

Parts available for pick-up in Emerald anytime or at Chadstone during weekdays. Will post suitable items at buyers expense. Contact me here in this thread or PM if interested in any part or want more information.

hey mate, bit confused, your car was auto but the rad is for a manual? how did the gear box lines connect to it? i thought it was my lucky day then! anyway let me know and i might be interested! cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...