Jump to content
SAU Community

Recommended Posts

found a bike tweety matt :)!!!!!

http://www.gumtree.com.au/s-ad/newcastle-region/motorcycles/2012-ninja-250r-special-edition/1011680618

he replied to my want to buy add saying 5k and i said i cant go over 4k but ill let him know if i change my mind and he said it needs to go asap so i said 4500 and he said yes! hes dropping it at my house tomorrow!!!

lets get these licenses chook! hahaha so pumped!!!

really want to come but the skyline is way too sick to come out. it sounds like a subaru until it warms up and then it backfires to the point where i got pulled over and severly warned. and my power steering needs new fluid and im too poor for that. maybe next time.

really want to come but the skyline is way too sick to come out. it sounds like a subaru until it warms up and then it backfires to the point where i got pulled over and severly warned. and my power steering needs new fluid and im too poor for that. maybe next time.

Doesn't sound good

You checked plugs and coil packs yet?

it all started after i pulled the injectors out to check them. they need replacing (plastic bit on ones cracked) and yeah ignition is all fine, its a fuel issue. not including air as ive replaced the oily air filter and cleaned out as much junk as i can.

Hey guys, im new to SAU. Finally got my track 33 in a road cruising condition. Looking to get more involved with you guys from around the newy area. Ill keep an eye out for your next meet and tag along.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I may have my math slightly wrong, I'm not double checking that again, but the factory spec for fuel pressure is to set it with the engine IDLING (in vacuum). That spec is 51PSi while idling. So now add +10psi for atmospheric, and +7 for 7psi of boost, and we need 68psi of fuel pressure at full noise, and 51psi idling. That's according to the FSM I found last night for M35. So MINIMUM fuel pressure should be 51psi and it climbs from there.
    • Provided that what you see makes sense and is not "linear" between, say 1.9 and 2.1 volts and that's the whole range you get. You still need it to be doing one end of the 0-5v range at one end of travel, and the other end of the 0-5v range at WOT.
    • So just calibrate whatever voltage the closed position and full throttle position is and check linearity ? Sounds good to me 
    • go look at the live data, and slowly open and close the throttle, if it is moving in a linear fashion, just do a re-calibration. OR if you really want to, adjust the TPS position so it's under 1V (no need to be bang on a 0,45V, it's not a stock ECU), then recal. Job done, rip skids, post it here.
    • Looks better than dusted paint, and also looks better than the old OEM one, much happy  
×
×
  • Create New...