Jump to content
SAU Community

Recommended Posts

got a spare 15k? lol.

Not even, got a ls3 here that came with an aftermarket cam and clutch brand new (straight from GM apart from cam and clutch) for 6k. Made 330rwkw straight out of the crate. Pick up a second hand gearbox, sort a few custom mounts and you'll be killing RB's everywhere in no time. They may be "dinosaurs" as far as technology goes but bang for buck, not much beats them.

No there are no conversion kits for this.

Engine mounts and gearbox mounts are easy.

Exhaust headers are hard as the RHS doesnt clear the rack/steering colum too well.

Getting it legal in SA would be a PITA. Is it for track use?

Not even, got a ls3 here that came with an aftermarket cam and clutch brand new (straight from GM apart from cam and clutch) for 6k. Made 330rwkw straight out of the crate. Pick up a second hand gearbox, sort a few custom mounts and you'll be killing RB's everywhere in no time. They may be "dinosaurs" as far as technology goes but bang for buck, not much beats them.

No need to preach to me about LS awesomeness ;) you will find that an LS7 mentioned is about 13.5k$USD and upwards, they are hand built and have titanium / forged components.

No need to preach to me about LS awesomeness ;) you will find that an LS7 mentioned is about 13.5k$USD and upwards, they are hand built and have titanium / forged components.

Yer but my main point was you don't even need an ls7 to easily make more than enough power for the street without losing any driveability. A LS3 with a cam, exhaust and tune in something lighter than a commodore will destroy anything RB powered on the street, except for a very well set up GTR.

for a more modern twist try a VH45DE, still have that awesome V8 sound and well as OHC and 4 valves per cylinder, not any more hassle than fitting a LS1/cheaper to buy/putting a nissan motor into a nissan, fits into a 31 with ease as ive seen one in a HR31 coupe

for a more modern twist try a VH45DE, still have that awesome V8 sound and well as OHC and 4 valves per cylinder, not any more hassle than fitting a LS1/cheaper to buy/putting a nissan motor into a nissan, fits into a 31 with ease as ive seen one in a HR31 coupe

Imo not as good an engine, plus they have massive ass heads that take up heaps of room.

Motor isn't really much cheaper either, considering how many aftermarket parts there are for the LS1 and how much power/torque they make standard I'd go the LS1 route.

The vh45 is meant to be easier to fit though.

Not even, got a ls3 here that came with an aftermarket cam and clutch brand new (straight from GM apart from cam and clutch) for 6k. Made 330rwkw straight out of the crate. Pick up a second hand gearbox, sort a few custom mounts and you'll be killing RB's everywhere in no time. They may be "dinosaurs" as far as technology goes but bang for buck, not much beats them.

Wow must have been a good one that's about 30-40kw more than most make!!

Wow must have been a good one that's about 30-40kw more than most make!!

That's with an aftermarket cam remember, not 100% standard.

Brothers old LS1 had aftermarket valve springs that were supposed to be the ducks nuts, 10k kms later one of them broke and the valve had sexy time with the piston, stocker holden springs FTW!

haha standard FTW :D

I've just picked up a VY SS, so going to be playing around with LS1s a bit over the next few years... 230-240rwkw with just a tune/exhaust/intake. Pretty cheap really.

The LS3s can get close to 300rwkw depending on the cam choice pretty easily as two friends of mine are well into the LS world with both making 380rwkw. One N/A and one blown on LS1s, one is a tuner of them.

It's amazing what a beating these engines take. One has been 380rwkw blown, for 80,000kms now (160,000 total)... Runs 10s and the only thing its broken was it blew the auto apart. Motor is still running fine!

I don't underestimate the ls engines but I just don't see the power that most do. STD Ls2's on our dyno are regularly in the 215-225rwkw mark on the autos another 10-15 rwkw with a manual. I've also seen two standard ls7 only make 310-320rwkw. How does this compare to other peoples dyno's?

depends if you're talking Mainline kw or Dyno Dynamics kw :P

Realistically, your average LS1 should pull ~215-220rwkw on an accurate dyno with bolt ons from what I have seen.

Cam choice is also a LOT more variable than I had previously thought; something that works great in the cathedral port heads (LS1/2/6) (like a Comp 222 224 112LSA) is crap for anything with L92 rectangular port heads (L76/LS3/L98), and its fairly easy to get it wrong and end up with a peak power pig rather than something with a fat curve (kinda like turbos I guess!)

LS3 can make over 300rwkw with cam and stock heads, GM Motorsports "Turbo Killer" cam springs to mind (237/242 112 lol)

It is also possible to get a cam that has too much lift than what the springs are rated to; hence there being several various type of spring types.

VH45DE swap is really dependent on how keen you are on sourcing rare-ish parts IMO. Cool conversion as well.

Ash: I never thought I'd see the day lol, sick of boost? :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
×
×
  • Create New...