Jump to content
SAU Community

Recommended Posts

got a spare 15k? lol.

Not even, got a ls3 here that came with an aftermarket cam and clutch brand new (straight from GM apart from cam and clutch) for 6k. Made 330rwkw straight out of the crate. Pick up a second hand gearbox, sort a few custom mounts and you'll be killing RB's everywhere in no time. They may be "dinosaurs" as far as technology goes but bang for buck, not much beats them.

No there are no conversion kits for this.

Engine mounts and gearbox mounts are easy.

Exhaust headers are hard as the RHS doesnt clear the rack/steering colum too well.

Getting it legal in SA would be a PITA. Is it for track use?

Not even, got a ls3 here that came with an aftermarket cam and clutch brand new (straight from GM apart from cam and clutch) for 6k. Made 330rwkw straight out of the crate. Pick up a second hand gearbox, sort a few custom mounts and you'll be killing RB's everywhere in no time. They may be "dinosaurs" as far as technology goes but bang for buck, not much beats them.

No need to preach to me about LS awesomeness ;) you will find that an LS7 mentioned is about 13.5k$USD and upwards, they are hand built and have titanium / forged components.

No need to preach to me about LS awesomeness ;) you will find that an LS7 mentioned is about 13.5k$USD and upwards, they are hand built and have titanium / forged components.

Yer but my main point was you don't even need an ls7 to easily make more than enough power for the street without losing any driveability. A LS3 with a cam, exhaust and tune in something lighter than a commodore will destroy anything RB powered on the street, except for a very well set up GTR.

for a more modern twist try a VH45DE, still have that awesome V8 sound and well as OHC and 4 valves per cylinder, not any more hassle than fitting a LS1/cheaper to buy/putting a nissan motor into a nissan, fits into a 31 with ease as ive seen one in a HR31 coupe

for a more modern twist try a VH45DE, still have that awesome V8 sound and well as OHC and 4 valves per cylinder, not any more hassle than fitting a LS1/cheaper to buy/putting a nissan motor into a nissan, fits into a 31 with ease as ive seen one in a HR31 coupe

Imo not as good an engine, plus they have massive ass heads that take up heaps of room.

Motor isn't really much cheaper either, considering how many aftermarket parts there are for the LS1 and how much power/torque they make standard I'd go the LS1 route.

The vh45 is meant to be easier to fit though.

Not even, got a ls3 here that came with an aftermarket cam and clutch brand new (straight from GM apart from cam and clutch) for 6k. Made 330rwkw straight out of the crate. Pick up a second hand gearbox, sort a few custom mounts and you'll be killing RB's everywhere in no time. They may be "dinosaurs" as far as technology goes but bang for buck, not much beats them.

Wow must have been a good one that's about 30-40kw more than most make!!

Wow must have been a good one that's about 30-40kw more than most make!!

That's with an aftermarket cam remember, not 100% standard.

Brothers old LS1 had aftermarket valve springs that were supposed to be the ducks nuts, 10k kms later one of them broke and the valve had sexy time with the piston, stocker holden springs FTW!

haha standard FTW :D

I've just picked up a VY SS, so going to be playing around with LS1s a bit over the next few years... 230-240rwkw with just a tune/exhaust/intake. Pretty cheap really.

The LS3s can get close to 300rwkw depending on the cam choice pretty easily as two friends of mine are well into the LS world with both making 380rwkw. One N/A and one blown on LS1s, one is a tuner of them.

It's amazing what a beating these engines take. One has been 380rwkw blown, for 80,000kms now (160,000 total)... Runs 10s and the only thing its broken was it blew the auto apart. Motor is still running fine!

I don't underestimate the ls engines but I just don't see the power that most do. STD Ls2's on our dyno are regularly in the 215-225rwkw mark on the autos another 10-15 rwkw with a manual. I've also seen two standard ls7 only make 310-320rwkw. How does this compare to other peoples dyno's?

depends if you're talking Mainline kw or Dyno Dynamics kw :P

Realistically, your average LS1 should pull ~215-220rwkw on an accurate dyno with bolt ons from what I have seen.

Cam choice is also a LOT more variable than I had previously thought; something that works great in the cathedral port heads (LS1/2/6) (like a Comp 222 224 112LSA) is crap for anything with L92 rectangular port heads (L76/LS3/L98), and its fairly easy to get it wrong and end up with a peak power pig rather than something with a fat curve (kinda like turbos I guess!)

LS3 can make over 300rwkw with cam and stock heads, GM Motorsports "Turbo Killer" cam springs to mind (237/242 112 lol)

It is also possible to get a cam that has too much lift than what the springs are rated to; hence there being several various type of spring types.

VH45DE swap is really dependent on how keen you are on sourcing rare-ish parts IMO. Cool conversion as well.

Ash: I never thought I'd see the day lol, sick of boost? :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...