Jump to content
SAU Community

I Broke My R33 Gtr Front Diff :(

tommis85
 Share

Recommended Posts

tommis85 Mentor

tommis85

Posted
Posted

Hi all,

It looks like that a couple hours on the dyno were the straw that broke the camel's back....my front diff. On the way back from tuning the diff was emitting horrible sounds and after inspections it turns out we have a severely worn set of gears in it. The crown gear is missing all it's heat coating and well, is very worn down. Looks like a wrong batch of oil was used that was thin as water.

My mechanic in town has located one mob that has some 2nd hand diff innards for sale but with quite a price tag attached.

Do any of you guys know where else I could get some from, short of me putting up a WTB ad? Also, I take it that I could you gears from a 32?

....I have done a bit of "googling" but have mainly been coming across UK threads.

Thanks for your time gents

PS - car is currently in rear wheel drive "mode" with front prop shaft removed to save the diff from locking up completely or something horrid like that.

Link to comment
https://www.sau.com.au/forums/topic/403380-i-broke-my-r33-gtr-front-diff/
Share on other sites
R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Having swapped to Nismo front/rear before i sold my GTR - no word of a lie probably the best mods I did.

The car handled so much better there is no scale of measure i could put to it thats how good the improvements were over stock/worn diffs as they lock perfectly.

tommis85 Mentor

tommis85

Posted
  • Author
Posted

Ah ok, yeh I can imagine. It would have to be as awesome as putting in new coil overs or something like that!

Only problem is that I don't really have a spare $1500 to throw at it...may have to do it later down the track.

Sounds pretty nasty with your sump!

  • 3 months later...
Count Grantleyish Grand Master

Count Grantleyish

Posted
Posted

Sorry about thread dig but could you please describe the sound when the front LSD broke?

Did it made clicking sound that you can feel while driving it?

Cheers

tommis85 Mentor

tommis85

Posted
  • Author
Posted

Sorry about thread dig but could you please describe the sound when the front LSD broke?

Did it made clicking sound that you can feel while driving it?

Cheers

It sounded like a wicked set of straight cut gears ;-) No clicking or vibrating...just noise because of how the teeth were worn (no longer helical etc)

Is yours broke?

Count Grantleyish Grand Master

Count Grantleyish

Posted
Posted

It sounded like a wicked set of straight cut gears ;-) No clicking or vibrating...just noise because of how the teeth were worn (no longer helical etc)

Is yours broke?

I've no idea at the moment, waiting for friend to come over and have a look at it, hopefully it's just the CV like I originally thought.

We'll see...

tommis85 Mentor

tommis85

Posted
  • Author
Posted

Well if it's clicking then there's a fair chance it's a worn CV....does it click when your driving around sharp bends/corners?

If the diff is making a clicking or clunking sound then it's bound to be in really bad shape haha

Count Grantleyish Grand Master

Count Grantleyish

Posted
Posted

It turns out it wasn't either CV or front diff, oddly it was coilovers... Clicking sound happen when I braked it.

Oh well, all that worrying for nothing!

Munro Experienced

Munro

Posted
Posted

I am looking for a GTR front crownwheel & pinion at the moment.

Too much power to the front wheels - have broken the teeth off mine!

Already have good LSD centre - just need the gears if anyone has them spare

after changing ratios.....................

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      RH9 R32 GTR Build Thread

      By soviet_merlin · Posted

      Oof, I will forevermore have those shredded gears in mind whenever someone talks about showing mechanical sympathy towards their car. Thanks for the photos, fascinating stuff!
    • Dose Pipe Sutututu
      RH9 R32 GTR Build Thread

      By Dose Pipe Sutututu · Posted

      Curious to see how the SpeedTek stuff holds up
    • OST Micah
      RH9 R32 GTR Build Thread

      By OST Micah · Posted

      The holdups last year were drivetrain related. I had the car out right after getting the bearing issue resolved. Third launch and the car didn't move after releasing the clutch. It had sheared all the engagement teeth off the 1st gear.    Thankfully no other damage was done. I set an aftermarket gear beside an OEM gear and found that the engagement teeth on the OEM gear were much larger and better supported. Looking through my bin of spare transmission gears I found that there are two types of tooth on the OEM first gears - the larger tooth and the smaller tooth. It looks like most aftermarket gearset manufacturers base their design on the smaller tooth. OEM large tooth left - Speedtek, OS Giken, etc or OEM small tooth right Decided to give that larger engagement tooth a try. Pressed the ring off an OEM gear and sent it to a transmission manufacturer here in the States. They did their "faceplating" operation with my synchro ring on the Speedtek gear.   I reassembled it, took it back to the track and promptly destroyed the gear itself.  I'll rebuild this and use it as a spare - thankfully just first gear and the countershaft are damaged beyond repair. Definitely disheartening but my welded on engagement tooth ring held up!  Moved to Speedtek's dog engagement design as the gears appear to be much stronger. So far they have taken much more abuse at the track. Also scored a Stillway lockout from the Netherands for super cheap. It's for some other RB transmission so it took a bit of fabrication to fit but honestly a very easy job. I also had to heavily modify the gates as they were very different.   Then for some reason at the last test and tune a silicon coupler below the throttle blew off and took out the radiator and fan. Thankfully it was in the burnout box and not down track. This car is really beating me up - I still haven't made a pass in it. Ran it through the gears many times on the street but it keeps biting me at the track.  Currently in the process of replacing the radiator and remaking the throttle pipe to remove the coupler and use a cast 90 and a vband. I WILL get this thing down the track...
    • Ozdavroz
      Dumb rich kid tries modding for the first time

      By Ozdavroz · Posted

      Covers most of the above points really. There's a few exceptions but most just see driving as an irritating but necessary task they must complete if they want to get anywhere on time. Also see it as a good time to show their awesome multi-tasking abilities on their mobile and/or doing their makeup.  
    • OST Micah
      RH9 R32 GTR Build Thread

      By OST Micah · Posted

      I don't believe I posted pictures of the second oil pump pickup I added so here they are. Data shows it gets oil pressure up to the relief pressure much earlier in the RPM. Is that important? Not likely... This was just another attempt to fix the bearing issues.   I also heavily opened up the inlet to the pump since it now had to flow oil from two pickups. I believe the diameter increased about 1/8".
×
×
  • Create New...