Jump to content
SAU Community

Recommended Posts

hi im doin a RB 25/30 specs include :

spool RB30DET (DOHC) Rebuild Kit CP 9:1 , RB head oil drain kit, Camtech 268/272 cams , RB25det head , RB20 covers, oil pump spool, crank collar, turbo manifold 6booost,

RB26dett plenum, HTA GT3586R turbo , water pump N1, R34 RB25det 5 speed gearbox

some pics :

RB30 as i got it

301807_10150785934155974_1967304187_n.jpg

RB25det head as i got it

467552_10150585369340974_1778638164_o.jpg

RB25det head sittin on the RB30 block with the RB20 covers and with a modiffied KKK turbo just for looks!

544993_10150851561440974_1152166161_n.jpg

will add more pics as i go

CHEERS Oscar

Edited by MRHD66
Link to comment
https://www.sau.com.au/forums/topic/403700-my-rb2530-build/
Share on other sites

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

How is the rb26 plenum going onto the rb25 head? Pretty sure they aren't compatible without a shite tonne of modifications.

Also, you should have put this in the build section!

power tune do a manifold adapter kit that I will be using
Link to comment
https://www.sau.com.au/forums/topic/403700-my-rb2530-build/#findComment-6423063
Share on other sites

how so mate

The water galleries are offset from one another so the plates need to mismatch to create an angle. You cannot use a gasket in between the two halves as it will block the outer one

They may be ok but from personal experience they are a complete f**k around to seal properly. Most people just use a tonne of silicon but that can block the water gallery and present its own problems

They may have changed the design since I saw the last one though so put up some pics once you get it

Link to comment
https://www.sau.com.au/forums/topic/403700-my-rb2530-build/#findComment-6423240
Share on other sites

how much f#cking around Is gettin VCT to work on a RB26 head

For me.....none at all.

I'm not suggesting you go RB26 head but there are no gains by going RB26 plenum and throttles. In fact, your tuner is going to have an extremely hard time making it run nicely. You have essentially lengthened the intake runner by another inch or more which creates all kinds of problems with air bouncing back from the valve head and transient throttle at lower revs.

You are definitely better off with a Greddy or similar.

Link to comment
https://www.sau.com.au/forums/topic/403700-my-rb2530-build/#findComment-6423271
Share on other sites

For me.....none at all.

I'm not suggesting you go RB26 head but there are no gains by going RB26 plenum and throttles. In fact, your tuner is going to have an extremely hard time making it run nicely. You have essentially lengthened the intake runner by another inch or more which creates all kinds of problems with air bouncing back from the valve head and transient throttle at lower revs.

You are definitely better off with a Greddy or similar.

how much it cost to make RB26vct and do u use a RB25neo intake cam? I know it's not just cam too Edited by MRHD66
Link to comment
https://www.sau.com.au/forums/topic/403700-my-rb2530-build/#findComment-6423277
Share on other sites

how much it cost to make RB26vct and do u use a RB25neo intake cam? I know it's not just cam too

It's about $2500 with the head off.

No we designed our own custom camshafts. It's also important to consider valve clearance so not something I would recommend attempting at home

Link to comment
https://www.sau.com.au/forums/topic/403700-my-rb2530-build/#findComment-6423279
Share on other sites

It's about $2500 with the head off.

No we designed our own custom camshafts. It's also important to consider valve clearance so not something I would recommend attempting at home

yeh mate I will get all that done when I get the VCT oil feed welded up
Link to comment
https://www.sau.com.au/forums/topic/403700-my-rb2530-build/#findComment-6423368
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, this is probably where a wiring diagram and a multimeter come into play.
    • I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
    • Ive converted a few clusters for the R33 with 320km/h dials. On the back there are some pads which can be bridged or unbridged (using solder or wick braid) to calibrate it. There is one bridge which is for MPH <> KPH; and there are combinations of bridges to offset it. There is probably a diagram  For example; this is my conversion for a 180km/h dial to a 320km/h dial (I put custom GT-R dials on it with the GTS25t layout) If you have J2 soldered (assuming the S clusters have a similar config to the R clusters); you may need to remove that solder
    • Back on topic 😉, these are some of the notable pages from the booklets that are supplied with each weekly parts update. I never knew the BNR32 test mule car had an S13 Silvia front end... *Edit: On closer inspection the test car still had the R32 body, but only the front end had Silvia panels etc.
×
×
  • Create New...