Jump to content
SAU Community

Recommended Posts

Hey guys, random question, when I'm filling up and I put the bowser nosel all the way in and pull the trigger, the fuel must be getting restricted in the tank and splashing back causing the bowser to click and stop. When filling up I have to shoot the petrol into my tank (literally hold the nosel 5cm away from the hole) and only hold the trigger half way otherwise it'll spill out. Never had this issue in my old R34, and it takes 10-15mins to fill the car up. Any ideas what could be causing this? The car has an aftermarket fuel pump unsure whether its internal or external, although something is restricting the fuel tank opening.... any ideas?

Link to comment
https://www.sau.com.au/forums/topic/403842-filling-up/
Share on other sites

LOL. ive had this pain in the arse on many cars, I dont know about keeping it 5cm away and shooting it in, Most would end up on you and the paint work.

Just nugde it in a little, Or sepnd a min or two finding the sweet spot. I find that all the way in dsoent work on many cars and as you said just keeps clicking.

Fuel pump has nothing to do with it either mate, its the fuel tank itself.

I think the angle of the boswer handle has alot to do with it.

Link to comment
https://www.sau.com.au/forums/topic/403842-filling-up/#findComment-6425932
Share on other sites

LOL. ive had this pain in the arse on many cars, I dont know about keeping it 5cm away and shooting it in, Most would end up on you and the paint work.

Just nugde it in a little, Or sepnd a min or two finding the sweet spot. I find that all the way in dsoent work on many cars and as you said just keeps clicking.

Fuel pump has nothing to do with it either mate, its the fuel tank itself.

I think the angle of the boswer handle has alot to do with it.

bingo-same with me.

Nozzle in about an inch find the right angle n she will take it full steam.

these are japanese cars after all :whistling:

Edited by jjman
Link to comment
https://www.sau.com.au/forums/topic/403842-filling-up/#findComment-6425955
Share on other sites

LOL! Thanks for the laugh at work guys...this question now means that every single question I ever had in my mind about my R33 has been asked and answered on this forum. You guys are the best!! I love this place! :yes:

- Yup, I also have to find the sweet spot on my R33 to let it flow.

Edited by dex_911
Link to comment
https://www.sau.com.au/forums/topic/403842-filling-up/#findComment-6430091
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...