Jump to content
SAU Community

Recommended Posts

Time has come to strip this, swallow my pride and move on. I dont get no time to use it and can do with the extra money atm. prices are pretty soild.

Wheels:

Weds shocki 18x11 -10 & 18x9.5 +8 (i think no stickers but i measured it) one of the front rims has a slight buckle on the inside. $2200 with fresh rubber federels up front 225/35 and rotalas 235 on rear and for an extra $180 i can get buckle fixed.

Work rezors pair only 18x11 -13 $1500 with fresh rubber

Work (dont know name) pair only $1500 with fresh rubber

Fabouls expand pair only 18x11-13 $1500 with fresh rubber

Suspension & steering:

Driftworks cs2 coilovers 6kg rear 9kg front $1000

Driftworks new offset caster rods $200

Driftworks caster rods $150

Driftworks traction rods$100

Driftworks camber$100

Driftworks toe $100

Driftworks Front LCA $300

Driftworks Rear LCA $300

Tien tie rods and ends pair $200

Caster rod support bracket $100

Rear s15 subframe with alloy offset bushes ans welded supports and powdercoated black $250

Front cross member r32 gts powdercoated black $150

S14 steering rack with new boots $100

Drivetrain:

Rb25 gearbox with Par 1-3 stright cut gears, currently it just got rebuilt with new syncros and forks but it popsout of 2nd now and then, so its going back for warranty but when i get it back is $4000

Exedy twin plate only done a couple of drift days $1000

Tailshaft to suit rb25 box and r200 diff in 180sx $400

Freshly built gtr diff with extra nismo plates and bigger oil case, pair of fresh driveshafts with nissan genuine boots, pair of brand new hubs $1700

Engine:

New NUR RB26 only done 1200ks before i pulled it down and built it. so new block, head, crank etc

Nitto JE forged Pistons

Nitto I beams

Nitto oil pump

Nitto drag series headgasket

Acl race bearings

arp main studs and headstuds

supertech stage 3 valve springs

kelford 272 cams

os giken cam gears

extra oil drain back of head

rear wheel drive sump with tomei baffel kit

ross tuff bond harmonic balancer

all mechine work done by duncan foster and built by mark at mrc dyno

motor just got run in, 392rwkw on 25psi on a 3076

for more info on motor ring me.

chasing $15k

Motor auxelires:

Polished rb26 intake plenum with itbs $600

Accu sump setup with cover made by hypertune and lines $800

Oil cooler kit with grex sandwich plate and lines $250

Turbosmart vee bov with cooler pipe $200

Saber cooler with 90deg bends welded on there $200

Alternator just been recoed $100

New starter $100

Turbo:

Gtx3076 twin scroll .82

6boost exh manifold ceremic coated

2x tial 38mm mvs

scremers cermic coated

3.5inch stanless dump pipe heat wraped

front cooler pipe with dash 4 nipples

all the braided lines oil, water, vacum etc

4inch inducer pipe with filter

selling this as a kit $4300 firm this only done 2track days and was fitted from hypertune

Exh:

3.5inch exh from dump on wards into twin 3.5inch tips, also comes with a rear muffler with twin 3.5inch tips $1000

Fabrication:

Catch can $400

water resiviour $350

D1 header tank $50

Powersteer resiviour $250

Fuel:

Expurt 1000cc inj and twin entry rail $700

turbosmart 2000 reg $200

2x bosch 044 $150 each

Surge tank $400

Electrical:

Vipec v88 $2000

M&W pro 16 cdi with 6 bosch coils on a neat alloy bracket and magnacore leads $1600

e-boost 2 black $400

Interior:

Bride copies but on genuine rails $500 each

Genuine TAKATA harness valid upto 2015 $350 each

D1 spec quick realese $40

Shell:

1993 180sx with old rego papers and tags

not rolling comes with genuine uras kit, dmax front and rear gaurds and bonnet

s15dash and gauges all wiring

custom cage

bigger tunnel

raised floor section for exh

tubs

removable front end

seam welded

dash green inside black outside.

it hard to describe the shell you have to look at it, its all quality this wasnt sprayed or fab work done in a backyard, this shell has 30k spent on it.

after $9k

all these parts on the car are new and less then 1000ks old located in castle hill 0407008651, i havnt stripped car yet but will start next week

Link to comment
https://www.sau.com.au/forums/topic/404106-stripping-my-rb26-180sx/
Share on other sites

Possibly keen on cdi setup. Does it come with everything needed to drop straight into RB26 car, or will additional wiring be needed?

you will still need to modify wiring a bit, but comes with everything to work loom, coils bracket leads etc

oil cooler kit, all fabrication, interior, gtr rear end, 1 044, surge tank, injectors and rail, reg starter sold

also i think the turbo kit will suit rb20 and 25 by the look of the flange, has more wholes suits 25 by the looks of it, ill ask 6boost to confirm

That's crazy! Be sad to see it all pulled apart and sold off.

Free bump though, great bloke to buy off as I bought his old Precision turbo and manifold. Very helpful. Best of luck

That's crazy! Be sad to see it all pulled apart and sold off.

Free bump though, great bloke to buy off as I bought his old Precision turbo and manifold. Very helpful. Best of luck

Hey mate thanks.

THIS FOR SALE THREAD IS CLOSED, LOT OF THESE PARTS ARNT AVAILABLE AND SOME PRICES HAVE BEEN REVISED....HERES THE NEW THREAD http://www.skylinesaustralia.com/forums/topic/404424-r34-nur-rb26-gtx3076-s14-s15-cusco-cage-deep-dish-bnheaps-of-stuff/

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
×
×
  • Create New...