Jump to content
SAU Community

Engine Bay Relay Box Plug?

Plattsy

By Plattsy,
in General Maintenance

 Share

Recommended Posts

Plattsy Grand Master

Plattsy

Posted
Posted

hey guys i have a plug that is disconnected, its a brown wire inside the box and runs thru the bottom, its connected to the shell via a clip but it is not plugged into anything? any idea what it is? also i have an earth strap connected to the shell/chassis above the cat convertor, its sheared at the other end where should that connect?!

one last one.......

there is a small plug under the drivers seat that is disconnected?

any ideas/answers are greatfully recieved! thanks fellas!

Link to comment
https://www.sau.com.au/forums/topic/404182-engine-bay-relay-box-plug/
Share on other sites
Victory Mentor

Victory

Posted
Posted

Without a picture to identify which plug you are referring (because these are so many) it is difficult to identify which on it is.

They run a few earth straps on the engine and exhaust so that the coolent does not become charged and erode the radiator/block so work out a way to reattach the earth cable.

The plug under the drivers seat is connected to the seat belt buckle and when you plug in the seat belt it turns off the seat belt light.

Plattsy Grand Master

Plattsy

Posted
  • Author
Posted

Could explain the rusty coolant I dropped a few weeks ago! I'll check te seat belt light! And the plug sorry for no picture but there genuinely is only one hanging out of mine!

Thanks again!

GoHard Collaborator

GoHard

Posted
Posted (edited)

I dunno what it does but I do know on mine, just under that plug another wire comes through a rubber bung. I would have though you would be able to see the hole in that photo though... Series 1 or 2?

Edit just went out to have a look and just next to those 2 bits sticking out of the paint work is where the wire comes out. You dont have a hole there...

Edited by GoHard
KnightRiderR33 Collaborator

KnightRiderR33

Posted
Posted

i have s1 r33 gtst and have been told that it is the original plug for the standard ballist running hid from japan they are remvoved to comply with ADR but like i said i was told that not exactly sure myslef

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • funkymonkey
      Howdy Y'all

      By funkymonkey · Posted

      Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Dose Pipe Sutututu
      Starting again

      By Dose Pipe Sutututu · Posted

      Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
×
×
  • Create New...