Jump to content
SAU Community

Complete Rb26Dett Engine - Forged Hks Pistons, -5 Turbos

Rowdyr32
 Share

Recommended Posts

Rowdyr32 Mentor

Rowdyr32

Posted
Posted (edited)

Due to parting out my car this engine is for sale seperately. Engine will be removed tomorrow or during the week.

It comes with HKS Forged pistons. This will be confirmed when the sump is removed for inspection. They are definently not standard as they don't have 5mm ish round raised circle on them when viewed though the spark plug hole. I imported the car with this engine in it. The spec sheet mentioned HKS pistons. This can be believed as everything else listed replicated what was on the car.

Engine has never had larger injectors fitted therefore has never exceeded 300rwkw. Everyone knows these engine will last forever when run under 300rwkw and boosted around 15psi with a good tune. I drove it with 280rwkw just to be safe as engine rebuilds are the nemesis of GTR owners.

I cannot confirm yet if it has a N1 oil pump or R33 crank. It may even be an R33 GTR motor? Rods are also unknown? Never saw the oil light flash or gauge drop due to surge.

Cams are standard and fitted with adjustable cam gears fitted.

Engine has never been overheated in my ownership.

Rocker covers and cam cover have been painted in 2 pack metallic silver.

All electronics/accesories attached to the engine will be included.

-5 turbos have limited km's with adjustable actuators. Willing to sell these seperately.

With these turbos I drove it for a year. After that the car spent a year EPA'd noise (was cleared) and then driven a few times the following year. Last 2 years it has been de-reg'd just sitting in my shed. Started occasionally.

Front diff/sump included.

If bought in the next few weeks with the turbos I'll throw in some custom made 3 inch dumps plus twin 3 inch front pipes merged to 3.5 inch pipe with 3 inch flange.

Happy to do a comp or leakdown test after removal. Sold the gearbox before I had a chance to check it.

Need to sell these. I don't want them taking up space!

Pictures will be added during the week not that what an engine looks like matters. Its the condition inside that counts!

$5000ono for engine and turbos. Can supply everything needed to do a GTSt conversion for a few extra dollars. I've done the conversion before.

Also have a OS Giken Triple plate clutch in great condition. Prob 90% meat left $1500 - These are $3000 new and never ever thought of slipping.

Located in southern suburbs of Melbourne. Happy to feight but please organise you own prices.

Edited by Rowdyr32
  • 2 weeks later...
  • 3 weeks later...
  • 2 weeks later...
Rowdyr32 Mentor

Rowdyr32

Posted
  • Author
Posted

Sorry guys. Forgot about this.

Engine has been just sitting in the car for months unbolted awaiting an engine crane.

Also I'm chasing $1300 for the turbos. Their in perfect condition.

Now there's a bit of interest in the engine I might lift it out over the weekend.

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • Kinkstaah
      Wheel Sizes & Offsets For Skylines

      By Kinkstaah · Posted

      If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • GTSBoy
      Wheel Sizes & Offsets For Skylines

      By GTSBoy · Posted

      If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • MBS206
      MAJOR FUEL ISSUES 25det neo r32

      By MBS206 · Posted

      Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...