Jump to content
SAU Community

Complete Rb26Dett Engine - Forged Hks Pistons, -5 Turbos

Rowdyr32
 Share

Recommended Posts

Rowdyr32 Mentor

Rowdyr32

Posted
Posted (edited)

Due to parting out my car this engine is for sale seperately. Engine will be removed tomorrow or during the week.

It comes with HKS Forged pistons. This will be confirmed when the sump is removed for inspection. They are definently not standard as they don't have 5mm ish round raised circle on them when viewed though the spark plug hole. I imported the car with this engine in it. The spec sheet mentioned HKS pistons. This can be believed as everything else listed replicated what was on the car.

Engine has never had larger injectors fitted therefore has never exceeded 300rwkw. Everyone knows these engine will last forever when run under 300rwkw and boosted around 15psi with a good tune. I drove it with 280rwkw just to be safe as engine rebuilds are the nemesis of GTR owners.

I cannot confirm yet if it has a N1 oil pump or R33 crank. It may even be an R33 GTR motor? Rods are also unknown? Never saw the oil light flash or gauge drop due to surge.

Cams are standard and fitted with adjustable cam gears fitted.

Engine has never been overheated in my ownership.

Rocker covers and cam cover have been painted in 2 pack metallic silver.

All electronics/accesories attached to the engine will be included.

-5 turbos have limited km's with adjustable actuators. Willing to sell these seperately.

With these turbos I drove it for a year. After that the car spent a year EPA'd noise (was cleared) and then driven a few times the following year. Last 2 years it has been de-reg'd just sitting in my shed. Started occasionally.

Front diff/sump included.

If bought in the next few weeks with the turbos I'll throw in some custom made 3 inch dumps plus twin 3 inch front pipes merged to 3.5 inch pipe with 3 inch flange.

Happy to do a comp or leakdown test after removal. Sold the gearbox before I had a chance to check it.

Need to sell these. I don't want them taking up space!

Pictures will be added during the week not that what an engine looks like matters. Its the condition inside that counts!

$5000ono for engine and turbos. Can supply everything needed to do a GTSt conversion for a few extra dollars. I've done the conversion before.

Also have a OS Giken Triple plate clutch in great condition. Prob 90% meat left $1500 - These are $3000 new and never ever thought of slipping.

Located in southern suburbs of Melbourne. Happy to feight but please organise you own prices.

Edited by Rowdyr32
  • 2 weeks later...
  • 3 weeks later...
  • 2 weeks later...
Rowdyr32 Mentor

Rowdyr32

Posted
  • Author
Posted

Sorry guys. Forgot about this.

Engine has been just sitting in the car for months unbolted awaiting an engine crane.

Also I'm chasing $1300 for the turbos. Their in perfect condition.

Now there's a bit of interest in the engine I might lift it out over the weekend.

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • AnimalGarage
      Can you mount the ATTESA pump in other locations?

      By AnimalGarage · Posted

      According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • GTSBoy
      R34 25GT Engine Light 21

      By GTSBoy · Posted

      If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • The Bogan
      SAU NSW - R U OK? Southern Highlands Cruise

      By The Bogan · Posted

      Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...