Jump to content
SAU Community

Need Info On A R33Gtst Conversion To Gts4 Awd

monty_r33
 Share

Recommended Posts

monty_r33 Community Regular

monty_r33

Posted
Posted

Has any one attempted to convert a rwd r33 gtst to awd using gtr or gts4 parts. Help is need with as much info and advice as posible. Is this as simple as bolting awd bits in or not

monty_r33 Community Regular

monty_r33

Posted
  • Author
Posted

yeh but i have over a 100g spent on my r33 body and dont realy wanna repeat the same prosess on another car. Makes sence to me to spend 10g on mine then buy another and spending 100g to get it to the same specs as mine

monty_r33 Community Regular

monty_r33

Posted
  • Author
Posted

This is one of those questions that is pointless. This is because it is possible to buy a car that is already the way you want it to be (4WD) and you don't have to bankrupt yourself and drive yourself insane trying to convert a 2WD chassis to 4WD.

yeh but i have over a 100g spent on my r33 body and dont realy wanna repeat the same prosess on another car. Makes sence to me to spend 10g on mine then buy another and spending 100g to get it to the same specs as mine

monty_r33 Community Regular

monty_r33

Posted
  • Author
Posted

i bought this car a a bit of a show pony. now its a fully built 30/26 and hopeing to make some big number and would like the 4wd traction and handling to go with it. not into rwd drifting or skidding

sydking Veteran

sydking

Posted
Posted (edited)

If you have the cash flow mate then go for it, People are just jealous. Yes easier to get a AWD to begin with, But like you said, Youve spent 100k, Whats another 10k if it going to be exactally what you want and need.

Edited by sydking
sydking Veteran

sydking

Posted
Posted

I think it would be quite a big project though, BEst off getting the atessa pro unit form a vspec GTR, They are quite a bit quicker in sending info.

Transfercase, G sensors, Will need wheels to be same rolling diamator to keep the AWD happy.

Atessa pump will need to be set up in the boot?

will also need atessa ECU mounted in the boot aswell

89CAL Grand Master

89CAL

Posted
Posted

try looking into a wrecked R33 GTS4, Uses the same drivetrain as the GTR, Body wise its a gtst, just using a 26de and gtr running gear.

Shafts, ect should all swap over

This pretty much

Just find a straight shell, paint it and use the drivetrain etc plus all your stuff in it. Easier then converting yours and risking it being slightly unbalanced/dodgy or something like that.

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

i bought this car a a bit of a show pony. now its a fully built 30/26 and hopeing to make some big number and would like the 4wd traction and handling to go with it. not into rwd drifting or skidding

So put an auto into it and use decent tyres. Weight wins when it comes to handling.

Either way as stated you'd basically need an entire car to donate. It's not a simple case of bolting on parts. You need looms, ECUs, G-sensors and everything else to go with it. It's not a simple job by any means of the word.

monty_r33 Community Regular

monty_r33

Posted
  • Author
Posted

ok thanks for the info. I think i might try and sell mine as a complete rolla less motor and get a gtr or gts4 and start all over again and cut my losses.

Any one interested in a show car rolla.lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
    • Robot
      Skyline v36 350GT sedan hunting on idle

      By Robot · Posted

      Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...