Jump to content
SAU Community

Recommended Posts

Just want to know what WHP numbers I should expect or can acheive with my build (r32 GTR).. Here's the list of what my build will have:

Completely torn down and cleaned block

ACL race bearing (conrod,main,big end)

ARP bolts (conrod,main,big end)

Crank Collar for oil drive clearence issue machined onto stock crank

Stock pistons/rings and rods

ARP head studs

stock head (cleaned and minor port/polish)

Tomei poncams type b

GT2860-5's turbos

Tomei Manifolds

Tomei dumps

Nismo downpipe with veilside catback (deleted cat)

N1 oil pump

N1 water pump

Tomie timing belt

New OEM tensioner/spring

Complete gasket kit

750cc injectors

280lph fuel pump (not sure what company yet)

Power fc d-jetro with MAP sensors

After market I/C (not sure what make)

HKS oil relocation + oil cooler

HKS hard pipe kit

Split fire coil pack

Nismo coppermix twin plate clutch

Hope I haven't missed anything. I would like to know what are my options in WHP, meaning reliable whp, max whp, etc.

Thanks!

Your best answers will be in the rb26 dyno results thread. It will give a good, clear indication of what the -5's are capable of. To use the search function properly..

Go in to the thread.

In the top right hand of your screen, you'll see the search box.

Type in "garret 5". Make sure the option for 'this forum' is selected.

Ta da! You just searched for your answers :)

Short answer... There isnt a single, cut to size answer for you.

^^^rods would be fine with -5's, but pistions & ati/ross balance and a full balance would be good investment.

Also do a bit of research on the n1 oil pump - Some people have had trouble with them, some haven't - just enusre you know the limitations of the rb oil pump deisgn and why they fail before selecting one (personaly, i recommand nitto - they pump everything from oil to crank casing :-))

Some varible cam gears would also be a good investment.

Edit: saw you had poncams down - good choice :banana:

Edited by wedge_r34gtr

the reason why I didn't go with complete forged internals, etc was because I wasn't originally planning on doing a build lol. I bought the upgraded turbos but at the same time the engine was making a strange knocking sound so I decided to try to find the issue before going with better turbo's. Turns out that everything was in good order throughout the engine so I just decided, with the budget I somewhat had, to change things that needed to be changed while the engine was in pieces. I was told by my machine shop that the pistons and rods are in great shape so they only honed and cleaned everything. So new rings and bearings/bolts are changing in the bottom end. I wish I could have completely redone the bottom end and head but its not my time right now :( As for the oil pump, I already have the N1 waiting to be put in but I purchased a crank collar to be certain the clearances between the crank and the oil pump aren't too loose. Fuel pump isn't ordered yet so i'll look for a 350lph pump, any suggestions on makes? Also, does anyone on here have access to FAST, spent a good portion of my day trying to find what year my block is to see if the crank issue was resolved in my block. engine block number is 034837A.

Honestly given pistons are less than $1400, and all you need is a decent set of rod bolts... You are mad if you don't spend that little bit extra.

You'd likely never need to strip it down later to build it further. Just take the head off if/when and tidy it up later on and you are good to go!

Decided to go ahead a purchase some CP forged pistons. I'm kinda stuck on the fuel pump though. I have done alot of searching and research and it seems to me that with the injectors I have and the boost I'll be hitting, a 300lph fuel pump will be enough for me. I've found an apexi fuel pump that looks good, anyone have experience with these?

Maybe look into Nismo pump? Im fairly certain a few of the guys chasing power (400kw+) on here use one? Tried and proven bosch items are always an option..

Or the german one produced for Merc's and the like.. The name escapes me now. Starts with 'p' :/

Maybe look into Nismo pump? Im fairly certain a few of the guys chasing power (400kw+) on here use one? Tried and proven bosch items are always an option..

Or the german one produced for Merc's and the like.. The name escapes me now. Starts with 'p' :/

Like stated above, nismo pumps are good. Expensive but bolt right in... Depends on who tunes it to how much power you will make.

Some people make 400rwkw plus, on mine I only managed 375rwkw and that was with full volts..

Talk to your tuner, he will know what pumps work for what power

Decided to go with the Bosch 044 fuel pump with appropriate fittings, my buddy who is helping me with this project and has also completely rebuilt his gtr recommeneded me it. Also, picked up a Reimax gear set for the oil pump which should solve the N1 oil pump problem. Hope I have everything ready to go as I hate waiting on parts when things could be put back into the car (kinda impatient lol). Does anyone know how to figure out what year the engine is? Anyone use/have FAST? block plate number is 034837A and if i'm not mistaken that seems pretty close to when nissan addressed the crank/oil drive issue, correct?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...