Jump to content
SAU Community

Recommended Posts

Selling my beloved R33 GT-R because im getting into Real Estate and need a practical car this car has been my pride and joy and is looking for another car enthusiast who will take care of it. Following mods are Engine mods Upgraded/Steel Wheel GT-R turbos -7's capable of 300kw+ Apexi PowerFc ECU - Tuned by Chasers who are very well known on skylines australia. car is currently making 292 RWK with a safe tune only running 16psi of boost HKS 3" turbo back exhaust Greddy Front mount inter-cooler Greddy profec b spec 2 Boost controller Pod Filters Irridium spark plugs Ohlins coilovers Nismo short shifter Nismo Super Copper Mix Twin Plate Clutch DBA 5000 series slotted brakes (front) DBA 4000 series slotted brakes (rear) Bendix ultimate pads (both front and back) Interior - Workz Emotion Cai 18" Rims with 245 tyres all round Pioneer MVH-8350BT headunit JL Audio C2600 splits in front JL Audio C2600X rear speakers JL Audio XD700.5 Amp JL Audio W03 12" Sub-woofer Viper 5902 Alarm immobilizer with remote start Over 10k worth of mods, No money has been spared on this car literally. This GT-R will be missed deeply. No low ballers thankyou *****PRICED FOR QUICK SALE EASILY WORTH $25k+ *******

Reg till August 2012 and has done only 112,xxx kms

Price $21,500 not negotiable

  • Replies 77
  • Created
  • Last Reply

Top Posters In This Topic

Mate that is sexy in black

Makes me want to spray mine in black

Cheers man. Wish I could keep her..but like I said above..need a practical car for real estate and unfortunately can afford to have two cars

Good luck with it!

Great car for a great price. Good luck finding a GTR like this ones condition for such a cheap price. Will be gone in the next few weeks at this price so dont miss out!!

Hey man can you please be more specific about the mods? like what fuel pump, injectors. is it still running factory cams? Have you done the 100k service including timing belt and water pump along with all the seals changed? Does it still have factory oil pump in it? Thank you....

Hey man can you please be more specific about the mods? like what fuel pump, injectors. is it still running factory cams? Have you done the 100k service including timing belt and water pump along with all the seals changed? Does it still have factory oil pump in it? Thank you....

Fuel pump is standard from what I know unless the previous owner changed it. Injectors are standard, they are at there peek, that's the only reason it didn't make more power, change the injectors and you'll see 300rkw+ cams are standard. It has had its 100k major service. And yes factory oil pump. Any other questions feel free to ask. Immac car for so cheap! Need it gone

Still for sale..$21,000 till tomorrow. Get a deposit in quick..back up to $21,500 as of Monday and that price is non negotiable. Remember quality parts have been used on this immaculate GTR

Looks and sounds like a very nice car for those $. Your photos make a great change from the usual phone spec crap that most use.

Hope it sells soon for you.

Thanks guys. Weird, it's so cheaply priced surprised no one has taken up this great deal here..maybe it's too cheap..and people think there might be something wrong..all mechanic inspections welcomed at buyers cost

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...