Jump to content
SAU Community

Recommended Posts

After 11+ years of ownership it is time to sell my baby :(.

Car Basics:

- Nissan Skyline R33 GTS-t

- Build Date: Sep 1994

- Colour: '96 Ford Mustang "Laser Red" (3 layer pearl)

Body Kit:

- Factory M-type kit, slightly modified.

- ‘Custom Carbon’ 100% carbon fibre, vented bonnet (Not a cheap fibreglass bonnet)

- Genuine ‘C-West’ Carbon fibre GT-wing, custom brackets

- Stealth boot spoiler

- Rear "SKYLINE" illumunation

Engine Bay:

- Engine Type: RB30DET; Blueprinted and balanced

- Tomei Poncams

- Tomei Valve Springs

- Adjustable cam gears (Ex. and In.)

- Head “race ported”, Ex. side polished

- In. and Ex. ports match ported.

- ETM High-mount, tuned length, manifold

- Garrett GT3076R-IW (a/r 0.83). (internal gate sealed, can be reversed)

- GReddy 60mm Race Gate, with screamer pipe.

- 76mm FMIC, with custom piping

- BMC air pod in custom air box with a 4” cold air feed pipe from front bar.

- Turbo Smart Stealth “plumb-back” valve.

- Full turbo back 3.5” exhaust system.

- Sard 550cc Injectors

- Nismo adj. FPR

- Stock fuel pump, fuelling a 2L custom built surge tank.

- 1x Bosch 044 ext. fuel pump

- Split Fire coil packs

- 19 row oil cooler kit including oil filter relocation kit with thermostat.

- CP forged pistons

- REV con rods

- Crank smoothed and heat strengthened

- ARP bolts (head and rods)

- GTR race bearings

- Jun crank collar

- ATI RB26 harmonic balancer

- High Energy 7.0ltr, baffled, racing sump

- Metal head gasket

- Custom catch can

- GReedy Intake plenum with 89mm Q45 throttle body

- Nismo engine mounts

- Nismo thermostat

- N1 oil pump

- JJR Aluminium racing radiator

Performance:

- Wolf 3D V4plus ECU

- Nismo Competition Copper Max twin plate clutch.

- C’s short throw shifter

- KAAZ; 1.5way Mechanical LSD

Suspension, Brakes & Tyres:

- TEIN Super streets ADR approved.

- TEIN EDFC controller

- CUSCO Front upper adjustable control arm

- CUSCO Rear upper adjustable control arm

- CUSCO Adjustable tension rod

- Whiteline “Handling Pack”

- Whiteline “Pineapples”

- Whiteline adj. camber bushes

- GTR Brembo callipers

- 324mm GTR DBA5000 2pc rotors

- Ferodo Racing DS2500 pads

- Maltech Braided brake and clutch lines

- Custom brake booster stopper. (EAS Performance)

- Tomei HICAS locking kit

- JIC front strut brace

- GTR rear strut brace

- Front: RagaMaster 18x8.5 – Kumho KU36 245/40/ZR18

- Rear: RagaMaster 18x9.5 – Kumho KU36 265/35/ZR18

Interior:

- R33 GTR V-spec cluster with IMPUL 300km/h speedo

- Wolf3D Hand controller: Display mounted in dash, keypad in glove box

- Sparco suede racing wheel

- Works Bell removable hub lock

- Custom painted dash and door trimmings

- Nismo gear knob

- Apexi boost gauge

- AutoGauge Centre gauges; Oil Pressure, Oil Temp, Water Temp

- Pioneer DEH-P8650MP head unit

- Front: 1pr Hertz 6.5” 2-way spk

- Rear: 1pr Hertz 6.5” bass woofers

Achievements:

- Best Overall GTS-T/GTT, SAU Nationals 2011

- Best Engine Bay, Autosalon F1GP 2009

- Best Overall GTS-T/GTT, SAU VIC Show N’ Shine 2009

- Best R33 GTS-T, SAU VIC Show N’ Shine 2009

- Most Improved Car, SAU VIC 2008

- Best R33 GTS-T, SAU VIC Show N’ Shine 2006

*Every SAU Show n’ Shine I have entered, car has won best of it’s class. In the years missing, I have not attended the event.

- Probably a few other mods that i have forgotten

NOTE: Engine set-up was built for response and torque, never wanted a dyno/drag car. The only factor limiting power is the size of the turbo.

The sale includes all the parts I have stocked up on, over the last 11 years (standard and aftermarket). Trust me, it’s an extensive list of bits, which include; fmic’s, 19” & 17” wheels, airboxs, std colour coded bonnet, etc.

I have no intension to give the car away and am not in a rush to sell.

$25,000 neg.

Please contact me on: 0427 076490

Alan

Location: Near Calder Park RWY, Melbourne, Vic.

post-1811-0-04951200-1342524798_thumb.jpg post-1811-0-75512800-1342520603_thumb.jpg post-1811-0-39750300-1342520772_thumb.jpg

post-1811-0-26356100-1342522599_thumb.jpg post-1811-0-03648600-1342520988_thumb.jpg post-1811-0-38310300-1342523335_thumb.jpg

post-1811-0-69273300-1342524767_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/404955-highly-modified-r33-gtst/
Share on other sites

  • 1 month later...
  • 6 years later...
On 8/19/2012 at 11:02 PM, acsplit said:

Don't waste your time selling... too good a car to have chumps offer you 15 k for it!

keep it and let the good times roll

I have inadvertently followed your advice ? ??

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have had the r3c in for years now, maybe close to 7 years and it has never missed a beat, anyone can drive it. Super easy to drive around town, the hotter it gets does get a little hard but it holds the power easy as 
    • Shit thing to find eh? I guess the big issue is that whatever "fix" you do now, it might slow the rust down but won't fix it. I just wanted to add that in no way is fixing sheet metal in 3 dimensions the place to start with welding....that is a pro only job because its too hard to work out where things should be, let alone doing a clean enough job that it can look OK and still be strong too.  I needed to get a new rear quarter panel on the GTR and it took a pro weeks to get the old one off cleanly, new one on in the right place and looking somewhat like it should have with most of the previous connecting panels in place. Gluing a couple of bits of metal together with a welder in the garage is doable, but that is totally different to doing panel  replacement
    • This seems to be a very popular swap since all the turbo skyline prices went through the roof! I'll let someone more familiar chime in, but I understand that yes you probably want to swap the loom in to swap out the auto TCM stuff. You should not assume everything just plugs in either, you need to check at least the ECU wiring diagram for any differences at the plug at the left headlight and probably the ones near the ECU that join the dash loom too  
    • hows it fellas, my first post here which seems crazy cos half the forums i read are like the same age as me haha. to make a long story short ive got an r34 sedan (rb25de neo auto) which im swapping to a s0/s1? rb25det, r33 big box and nismo gt pro lsd. i have the motor and gearbox all bolted up outside the car, old motor and trans out. i bought the motor with stock ecu and loom, do i switch over to that? or will it be easier to get a r34 manual ecu and keep the loom if thats even possible.  also engine mounts look different, anything else thats different or incompatible? cheers, hope this all makes sense Paddy
    • att.4QNbuJlz_gNZPFBGFqeEvxSUHXkGt7z40V59MrtXTPg.mp4    
×
×
  • Create New...