Jump to content
SAU Community

Recommended Posts

hey guys this one is for all the peps that know about the RB26DETT, i just bought a R34 GTR a few weeks ago and last night noticed a noise that started when i was in lower gears under power, i was able to record it thismorning and have uploaded it. Some friends think it is lifters. The oil needs to be changed so i have bought some lifter addative and injector addative also, if anyone can ID the cause of this would help alot or even give me a place to start.

The car drives fine also, hits all gear shifts comes on boost, it is allso factor stock besides suspension and exhaust.

Cheers

http://www.youtube.com/watch?v=BiqNhzqfGEM&feature=youtu.be

Link to comment
https://www.sau.com.au/forums/topic/405289-r34-gtr-engine-noise/
Share on other sites

  • Replies 90
  • Created
  • Last Reply

Top Posters In This Topic

Yeh i did, had nissan in tasie go over the car, they pulled off the turbos did a compression test, all came up good, the onlythings they found was diff pinion seal needed to be replaced and also weaping sump, oil pressure is fine and oil is full, it is rather black tho so this is y im gettihng it changed tomorrow and adding the lifter addative.

I don't think your lifter additive will do anything. Reason being, and more knowledgeable people will correct me if I'm wrong, but lifter treatment is traditionally for motors with hydraulic lifters that suffer build up of contaminants. The RB26 having solid lifters cannot suffer the same problem. The lifters can need re-shimming if out of spec, the hydraulic ones are self clearenced.

Does it rise and lower with Revs, or road speed?

Could be a number of bad things unfortunately.... hope its something more simple

if its done im going to have to sell it cheap and just by something for 10k and cut my losses i think, its my daily to and from work w/o a car i cant get to work.

That sux man, but now you know why they say, if you buy a gtr you better make sure you have enough money to buy another one (implying a engine rebuild)

i would have thought if it was a big end or blown engine that the noise would have been there the whole time and not just when i accelerate in 1st and 2nd, and over 3k rpm in 3rd the noise is gone alltogeather.

yeh 3 months and i would have the cash to rebuild it but getting to work is a real pig without a car.

Edited by T4NK

I remember writing this....

On your number one point, no its not hard. Just expect to reach deep into your pockets. If you can do work yourself, and do some research into it, Rather than just taking whatever is in a kit, then it works out much cheaper.

Remember, gtrs have their failings too. You might go get one, and spin a bearing in your first week. Hello 8k basic rebuild.

Cost for cost, once and engine rebuild is taken into account the V will not disgrace itself against a gtr in a straight line. It doesn't have the benefit of awd, but it is also more comfortable and easier to drive IMO. And you'll never end up with oil in the rockers in a vq!

Terrible luck mate....

Don't sell it though, to move a car like that in the time frame you need to get another car, you'll be looking at getting 20-30k if your lucky I would think..

Maybe diagnosis it, if bad, buy a crapper then save for the rebuild...

Fingers crossed mate...

Hey mate sorry to hear about the car. This is my biggest fear, im currently looking for a 34 gtr and would be in the same boat as you if I bought one and this happened. I keep reading peoples posts about this happening so often with their GTRs and it kinda got me thinking of just buying a 32 gtr, that way i would have enough money for a rebuild.

If you dont mind me asking where did you get the car from and how much did you pay?? You can PM me if you dont want to post it here. Cheers.

Hopefully you get some good news from the mechanic but with my limited knowledge this sounds pretty serious.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...