Jump to content
SAU Community

Tv Tuning

THRLLR

By THRLLR,
in Four Door Family & Wagoneers

 Share

Recommended Posts

THRLLR Community Regular

THRLLR

Posted
Posted (edited)

Hi All,

another question about my stagea. i am not sure what stereo options were available in japan for the 260RS when it was sold. I found a massive bundle of wires that started behind the stereo and ran all the way to the boot of the stagea and ended tucked into the left side of the car (LHS rear wheel area). connected to nothing at either end, but it seems there was a cd stacker behind the left boot trim, now just empty space.

When it arrived here it had been decked out with aftermarket system, AddZest (Clarion). It had the DVD Head unit with slideout screen and hideaway box/receiver, 5.1 surround component and TV Tuner.

I have managed to get most things working fine however 2 things are left that are bugging me. The radio tuner's range is not expanded and i wanted to know what i have to do to expand it to tune all australian radio stations.

Also, how do i receive TV signals/channels in australia (melbourne). Does it have anything to do with the FM expander? or is it something else entirely? Can anyone help me understand what is required to get the TV Tuner (Addzest/Clarion) box to display. All i get is static when i try to find a signal.

Edited by THRLLR
Link to comment
https://www.sau.com.au/forums/topic/405357-tv-tuning/
Share on other sites
Tommy Kaira RL Mentor

Tommy Kaira RL

Posted
Posted

If its the tuner from japan it wont work here. It is a different system. Replace it with an aussie one and feed that into your screen. You can still use the aerials that were connected to it and it has nothing to do with a band expander. If you want to expand your radio you need an FM band expander with the 2 pins and it plugs in line with your radio antenna and is powered up by ACC.

Link to comment
https://www.sau.com.au/forums/topic/405357-tv-tuning/#findComment-6455438
Share on other sites
THRLLR Community Regular

THRLLR

Posted
  • Author
Posted

If its the tuner from japan it wont work here. It is a different system. Replace it with an aussie one and feed that into your screen. You can still use the aerials that were connected to it and it has nothing to do with a band expander. If you want to expand your radio you need an FM band expander with the 2 pins and it plugs in line with your radio antenna and is powered up by ACC.

Awesome much appreciated. i thought as much about the tv tuner but i couldnt find anything to tell me otherwise. Does it have to be a Clarion unit? or any tv tuner?

Thanks heaps for the info it all makes much more sense now

Link to comment
https://www.sau.com.au/forums/topic/405357-tv-tuning/#findComment-6456218
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      My BMW E39 528i touring

      By PranK · Posted

      Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • GTSBoy
      My BMW E39 528i touring

      By GTSBoy · Posted

      Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • Duncan
      Neil's R33 Gts-t Build

      By Duncan · Posted

      OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • PranK
      My BMW E39 528i touring

      By PranK · Posted

      I forgot about my shiny new plates!
    • PranK
      My BMW E39 528i touring

      By PranK · Posted

      Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
×
×
  • Create New...