Jump to content
SAU Community

Recommended Posts

Item: Nissan Skyline R32 (RB20DET) Intake Manifold

KIT_350.jpg



Features:
- Give your engine bay a new look; top mirrror FINISH!
- 20% larger than the standard manifold allowing for increased air flow to each cylinder bank
- Plenum is designed to allow for precise air separation and allocation to each of the six original runners
- Complements performance cams, larger fuel injectors, fuel pumps and other such modifications
- Increases performance at med-high RPM range
- Made of precision aluminium - Alloy
- Ultra light construction
- Will accept original RB20DET throttle body (65mm version only)
- Comes with in-built bracket and port's to accept all original sensors, also incl. ALL 4x fittings (professional installation recommended)
- Upgrade to our universal 70mm throttle body, not a bolt-on
Now a new plenum for the RB20 guys as well!

R32_Install.jpg


INSTALL VID W/ SOUND HERE --- http://s623.beta.photobucket.com/user/wGNight/media/enginestart_zps912b2e0f.mp4.html


BOTTOM.jpg

RB_20-Fittings.jpg

$295 including Delivery & Insurance - SAU MEMBER PRICE

BUY_BUTTON.gif

Condition: Brand New

Contact: 0401599023 (anytime) OR [email protected]

  • Like 1
  • 2 weeks later...

Hi,

No modifications are required with our one, the only thing required is 1/8 NPT fitting for the vacuum port.

No installation instructions are supplied so professional installation recommended.

- Brendan

  • 4 months later...
  • 3 weeks later...

No modifications are required with our one, the only thing required is 1/8 NPT fitting for the vacuum port.

required

just bought this exact plenum, I am happy with it, its perfect for my specific needs, but you do get what you pay for, so cheap, is not without modifications, but easy mods,

I just ask that you guys describe your product a bit better

you don't need just one hose fitting, you need 4, as only one fitting from the original plenum will fit in the one big threaded hole, (thats the one on the underside) (just) it goes in about 4 turns) the other 3 do not accept anything from the o.g plenum, the holes are the wrong size, and the threads tapped arent the best, also some drill hole dags need to be cleaned off

  • 3 weeks later...
  • 2 months later...
  • 3 months later...

Big thanks to luke (calsonic14u) and brendan from vulture motorsport just fitted up the plenum and was stuck on the fittings but after a few quick calls we figured it out pretty fast we ended up using a 1/4 fitting barb to suit 5/8th hose and 3 1/8th fittings for the vac lines. Fired up first go :-)

  • 5 months later...

Sorry car hasnt had a chance and ive had no money to dyno her yet lol.

Oh and just for others info, just the wiring for the sensors on the throttle body need to be extended off the original harness. Very basic auto elec knowledge needed. And your Standard throttle cable of your R32 with reach no dramas. Some vacuum lines may need extending to.

  • 3 months later...
  • 2 months later...


  • Similar Content

  • Latest Posts

    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
×
×
  • Create New...