Jump to content
SAU Community

Gauge Holders For M35

ironpaw

By ironpaw,
in Four Door Family & Wagoneers

 Share

Recommended Posts

ironpaw Veteran

ironpaw

Posted
  • Author
Posted

But you can only have one or the other, the emanage communication or the sensor adapter I am fairly sure.

Just remember the Greddy sensors aren't cheap but they are accurate. I guess it's similar to buying a Defi set, just more compact.

So can the Informeter display boost via connecting to the Emanage?

if it can I'll get the Informeter...

scotty nm35 Grand Master

scotty nm35

Posted
Posted

I guess so, do you have the map sensor on the emu? I haven't used the communication cable for the informeter as it was connected to the Vmanage, perhaps that is why, not the external sensor harness.

ironpaw Veteran

ironpaw

Posted
  • Author
Posted (edited)

Yeah I've got the MAP sensor running to the EMU...don't tell me because I'm using the MAP sensor I can't connect the informeter to the EMU...garrrrh...

Hang on - the Greddy boost sensor for the Informeter looks identical to the MAP sensor I'm using for EMU...

yay?

Edited by ironpaw
Sunkist Grand Master

Sunkist

Posted
Posted

Yeah I've got the MAP sensor running to the EMU...don't tell me because I'm using the MAP sensor I can't connect the informeter to the EMU...garrrrh...

Hang on - the Greddy boost sensor for the Informeter looks identical to the MAP sensor I'm using for EMU...

yay?

Duuuurrrr thaz cuz itz tha saim sensa

Lol we've had this conversation before Jethro hahaha

pv35gt8 Collaborator

pv35gt8

Posted
Posted

ironpaw.... the picture in the first link shows the ignition barrel on the left - when it should be on the right.... so im assuming the picture is upside down, making the gauges mount from underneath?

Have another look at the steering wheel surround on your car, the ignition barrel location is part of the instrument cluster surround. The only cut-outs on the column cover are for headlight and wiper stalks.

yuuyama333jp-thumb-1316505337419104.jpg

Mr 20Valve Rising Star

Mr 20Valve

Posted
Posted

Which gauge did you get?

Don't tell me those fake Defi ones on ebay/forums for $60? hehe

Not a fake Defi, no.

It's called an Evo something or other... It's digital with a line of bars that go along the surround instead of a needle and digital numbers in the centre which make it pretty easy to read with a split second glance.

A bit flashy, but the price was right & I thought if give it a go.

ironpaw Veteran

ironpaw

Posted
  • Author
Posted (edited)

@pv35gt8

hmm, looking at this pic:

http://www.maperform...oupe-03-04.html

It seems like its just the top part of the steering wheel surround?

Take a look at the 2nd pic below...see what I mean? Its just a replace panel really. Doesn't involve the dash or igni barrel at all.

http://www.skylinesa...__fromsearch__1

Only issue is that its black...hmmm

Edited by ironpaw
Sunkist Grand Master

Sunkist

Posted
Posted

haha...well if I can score a whole dash in black then I'll go black...

I don't want a beige dash with a single black panel...

or you can just paint it in a colour as close as possible to it.

Sounds like a proposition?

you want in dont you

pv35gt8 Collaborator

pv35gt8

Posted
Posted

@pv35gt8

hmm, looking at this pic:

http://www.maperform...oupe-03-04.html

It seems like its just the top part of the steering wheel surround?

Take a look at the 2nd pic below...see what I mean? Its just a replace panel really. Doesn't involve the dash or igni barrel at all.

http://www.skylinesa...__fromsearch__1

Only issue is that its black...hmmm

That is the point I was trying to get across, solution could be as Aaron said paint it as close as you can or replace all trim around the binnacle to black to match.

Personally I would be looking at the painting solution as I don't think you want to replace the wheel as well.

I had found that gauge holder a while ago but at that time had no reason for the extra gauges, hence I did not purchase.

  • 3 weeks later...
ironpaw Veteran

ironpaw

Posted
  • Author
Posted (edited)

Ha, Greddy got back to me regarding getting the MAP reading/Values from the emanage:

"If you have electrical craftsmanship it can be done but for our liability purpose, you will need to run independent sensors to each unit."

Hmmmmm is it as simple as splicing the informeter harness into the existing MAP sensor? interesting..

Edited by ironpaw
scotty nm35 Grand Master

scotty nm35

Posted
Posted

No, the input resistance of the unit will affect the value seen making it inaccurate. Just buy the new sensor if you want an accurate gauge.

They are probably talking about making a circuit to feed a mirror signal.

  • 3 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      You Gregged a whole racetrack!?
    • GTSBoy
      R32 GT-R: 4WD Light Turns On After Bumps – Code 19 (ETS Motor) But No Issues Found

      By GTSBoy · Posted

      Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Bireley_32
      R32 GT-R: 4WD Light Turns On After Bumps – Code 19 (ETS Motor) But No Issues Found

      By Bireley_32 · Posted

      Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...