Jump to content
SAU Community

Recommended Posts

words.gif

THE BREAK IS OVER... :yes:

September the 8th...Its on.

And once again we ask for your assistance

For this event to run SMOOTH on TIME and SAFELY we need a small group of volunteers (Officials )

to help run the day. With out the help of volunteers we can not run these days.

Officials are needed in 3 sections in the morning and 1 section in the afternoon.

All Officials on the day will be supplied with drinks and lunch.

An Officials breifing will be held before the Drivers breifing so all volunteer Officials will need to

be at the DECA complex by 8.30 am on the Saturday morning the 8th of Sep.

So if your thinking about coming up for a look and not competing this is a great way to get up close

to the action.

Also if your competing and bringing a friend or 3 it would be great if they could put there hand up

to help out on the day.

So if this sounds like you or your friends post up in here or PM me and i will will put you on the list.

Cheers WayneO.

MORNING

SKIDPAN

STARTER...Wayne ..RCHOO

TIMMER......Campbell...REAMED

FINISHER....Martin.....emts

MINI WANG..?

STARTER.....Keiran..

TIMMER.......John....xxsRicho

FINISHER....Rob....bmdrifta

MARSHAL... Marc..

LONG WANG

STARTER..Anna ....NUTWGN

TIMMER.......Luke.... NUTR33

FINISHER....Brad...

SPOTTER 1 ..Juliette...llama_au

SPOTTER 2.. Abram

SPARE... ?????

AFTERNOON

SKIDPAN

STARTER.... Wayne.....RCHOO

TIMMER........Campbell..REAMED

TIMMER,,,

FINISHER

FINISHER

imagezjf.gif

Guys dont forget im still looking for more people to help out.

If you have never been to DECA and have any questions about what is expected of you

I will be at the meeting at Garage Cafe on Wendesday night. come up and have a chat.

WayneO

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...