Jump to content
SAU Community

Recommended Posts

Hi , im after some info as my 99' R34 GTR had no service interval books when i purchased it in 2010 , it currently has 70 k on the odometer so to be on the safe side so i decided to do a 100k service -

1. Replace water pump with new factory item ( mechanic )

2. Replace timing belt (mechanic)

3. Install adjustable Cam gears (mechanic )

3. Replace idler and tensioner bearings (mechanic)

4. Replace oil filter

5. Replace coolant

6. Replace all the belts AC, Power steer , fan belt

7. Drain and fill both front and back diffs - not 100% sure of oil

8. Drain and fill the gearbox - not 100% sure of oil

9. Replace Air filter

10. Spark plugs

11. Engine oil

12. Coilpacks

13. Check O2 sensors

Have i missed anything , also does anyone have a service interval book that details a 100k service ;)

Thanks for help

Edited by NISSAN GTR
Link to comment
https://www.sau.com.au/forums/topic/406167-require-r34-service-schedule-100k/
Share on other sites

Don't skimp out on the cam and crank seals, they're standard as part of the 100k service.

Might as well change the transfercase (only genuine Nissan fluid) and ATTESSA fluids too if you're doing the gearbox and diffs.

Coilpacks, completely unnecessary and a waste of money unless the car is misfiring.

As for gearbox oil, only use the proper Getrag stuff (Toyota V160 or genuine Nissan fluid etc). You will see recommendations like redline shockproof but these are for nissan 5 speeds, getrag boxes use ATF fluid so thorough research is needed if going with another brand like RP syncromax etc otherwise you will could damage an expensive gearbox if brand shopping.

I posted up the full itemised schedule for the major services at 40, 80 & 100 K some time ago.

It came from Nissan's UK Owners Manual since R34s were sold there.

It's here in General Maintenance somewhere :)

Terry-263.jpg

Terry-264.jpg

Legend:-

I = Inspect and Correct or Replace As Necessary

R = Replace

L = Lubricate

Engine And Emission Control Maintenance

Major Service of 80,000Km and 100,000Km

Engine Oil = R except for Turbo Engines which requires a change every 6 months or 5,000Km whichever is earlier

Oil Filter = R (and more frquently under harsh driving conditions)

Drive Belts = I

Engine Anti-freeze Coolant (ethylene glycol) = R

Cooling System = I

Air Cleaner Filter (paper type) = R

Intake and Exhaust Valve Clearance = I if noisy

Fuel Lines = I

Spark Plugs (Platiunum) = R (at 100,000Km)

Heated Oxygen Sensor (exhaust gas sensor) = I

EVAP Vapour Lines = I

Timing Belt = R

Fulcrum Bolts = I

Chassis And Body Maintenance

Major Service of 80,000 & 100,000Km

Brake, Clutch & Auto Transmission (for level and leaks) = I

Brake Fluid = R

Brake Booster Vacuum Hoses, Connections & Check Valve = I

Power Steering Fluid & Lines (for level and leaks) = I

Brake, Clutch & Exhaust Systems = I

Manual Transmission Gear Oil (for level and leaks) = I

Differential Gear Oil (for level and leaks) = I (to be checked every 2 yrs if car is more than 10 yrs old)

Limited-Slip Differential Gear Oil = R

Transfer Fluid = R

Steering Gear & Linkage, Axle & Suspension Parts = I

Propellor Shafts & Drive Shafts & Boots = I

Wheel Alignment & Wheel Rotation = I

Brake Pads, Rotors & Components = I

Locks, Hinges & Hood Latch = L

Seat Belts, Buckles, Retractors, Anchors & Adjusters = I

Foot Brake, Parking Brake & Clutch (for free play, stroke and operation) = I

Ventilation Air Filter = R

P1040765.jpg

Yes, on the Binder, it says R34 :)

Interesting how there is no mention of water pump replacement though , will replace anyway and bang some cam gears on

should make a difference !!!!

Thanks Terry and Rocky , your posts made me more confident i am doing the right thing here . :cheers:

Hi Terry

Can i have a pdf copy of this manual . been searching all over the net. Just bought a r34 GTT auto...thanks mate cheers

Hiya,

xntrq aka Ricky has a PDF. He's glad to send you that :)

I have the hard copy

If you'd like disc of the R34 workshop manual in PDF I can do that :)

You have mail.

To anyone else who needs these files, the link is here:

http://www.mediafire...kfp0g2vulagm88v

Contents:

The Sky Is The Limit - Pretty much a Skyline bible, tells you the history, fuel consumption, variations, what to look for during inspection (R33 specifics) etc.

Skyline R34 Brochure - I think you'd like this one Terry

R34 ECU Pin Outs - Each and every terminal number

Inside Fuse Box Map - In English

R34 GTR MFD Programming - How to program GTR MFD

R34 Scheduled Maintenance Handbook - When you reach a certain KM on your ODO, you do this and that.

R34 Service Manual (Workshop Manual) - This has EVERYTHING.

R34 Stereo Pin-Outs - Each and every terminal number

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...