Jump to content
SAU Community

RB20DET 148rwkw

davidl

By davidl,
in Engines & Forced Induction

 Share

Recommended Posts

davidl Collaborator

davidl

Posted
Posted

Hey Guys,

Had my car dyno on saturday, i made 148rwkw with a stock rb20det with exhaust and FMIC, on stock boost, the guys who dyno the car thought it was way to high so checked out the dyno setup which was correct.

Does this sound right? I have the rb20det in my silvia and didn't bother checking the turbo before it was on. Do you think it is a stock turbo?

Link to comment
https://www.sau.com.au/forums/topic/40623-rb20det-148rwkw/
Share on other sites
GTSR22 Experienced

GTSR22

Posted
Posted
Hey Guys,

Had my car dyno on saturday, i made 148rwkw with a stock rb20det with exhaust and FMIC, on stock boost, the guys who dyno the car thought it was way to high so checked out the dyno setup which was correct.  

Does this sound right? I have the rb20det in my silvia and didn't bother checking the turbo before it was on. Do you think it is a stock turbo?

yeh this sounds right.

standard they are suppose to come with 210ps so it does equal around what you have got. next get the turbo and computer done.

my cuz did the same mods as you and the turbo/computur pulled 200rwkw.

Link to comment
https://www.sau.com.au/forums/topic/40623-rb20det-148rwkw/#findComment-833484
Share on other sites
rsx84 Veteran

rsx84

Posted
Posted

most things i've read on mods to the r32 rb20det say that with the mods you have and also a rechipped ECU running 14psi should get around the 160rwkw mark?? are you shaw it was kws not hp as thats about the same reading?? i've been told that a vg30 turbo could get that kind of result but also with higher psi and tuning???

Link to comment
https://www.sau.com.au/forums/topic/40623-rb20det-148rwkw/#findComment-833872
Share on other sites
  • 6 months later...
Cubes Grand Master

Cubes

Posted
Posted

210-215ps is around 160kw AT the Flywheel. Not rear wheels. :D

148rwkw (~200-210kw at the FLYwheel) with say 11-12psi (which is where it should be with an Exhaust) is around the mark.

With AFR's at 12:1 & a few more degree's of ignition timing mine made 152rwkw on 12psi. I would say your AFR's are not rich, which is bad as when you decide to pump more boost in the old fuel pump won't want to come to the party and you will lean out.

15psi only saw a 12rwkw increase as the turbo begins to heat the air more and runs out of efficiency.

With a tuned computer 170rwkw is around the maximum you will get.

200rwkw must have been a very optimistic high reading dyno. Most probably a Hub Dyno.

Link to comment
https://www.sau.com.au/forums/topic/40623-rb20det-148rwkw/#findComment-1111272
Share on other sites
Cubes Grand Master

Cubes

Posted
Posted

A turbo can only flow so many cfm's before it starts chopping and superheating the air.

What dyno was that 200rwkw pulled on? All bets are it wasn't ran in the correct shootout mode/temp sensor placed incorrectly or it was on a hub dyno. :D

Doesn't matter, Dyno's are only good as a base tuning tool.

Shootout mode tries to make it an even playing field.

Link to comment
https://www.sau.com.au/forums/topic/40623-rb20det-148rwkw/#findComment-1111391
Share on other sites
nedb Proficient

nedb

Posted
Posted

My RB20 did 137 rwkw with turbo back exhaust, pod and R33 turbo on stock boost and everything else stock. A/F ratio was 13 and it had a slight misfire.

After upgrading the fuel system it went down to 130 rwkw and a healthy 11.3 fuel ratio and no misfire.

This was on DynoDynamics dyno in shootout mode at Unigroup.

Link to comment
https://www.sau.com.au/forums/topic/40623-rb20det-148rwkw/#findComment-1112085
Share on other sites
oscar32 Mentor

oscar32

Posted
Posted

I just fitted a wolf 3d along with a front mount, pump, full exhaust etc and rolled 152rwkw on a roller. I've had it on a hub a few times and the numbers are CONSIDERABLY higher. Without the dump it was showing 176 rwkws (yeah.. right). Car is heaps faster on the road. Just looking at turbo upgrades now.... I'd like a real 200 - 210 rwkws.

Link to comment
https://www.sau.com.au/forums/topic/40623-rb20det-148rwkw/#findComment-1113142
Share on other sites
dangerous_daveo Grand Master

dangerous_daveo

Posted
Posted
I just fitted a wolf 3d along with a front mount, pump, full exhaust etc and rolled 152rwkw on a roller. I've had it on a hub a few times and the numbers are CONSIDERABLY higher. Without the dump it was showing 176 rwkws (yeah.. right). Car is heaps faster on the road. Just looking at turbo upgrades now.... I'd like a real 200 - 210 rwkws.

Off topic but hey. How are you finding the wolf 3D? Is it the V4 and did you get the plug and play version?

Link to comment
https://www.sau.com.au/forums/topic/40623-rb20det-148rwkw/#findComment-1113151
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      spot the stagea

      By Duncan · Posted

      roof rail delete used to be a thing, they were made locally for a while too
    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • AnimalGarage
      Can you mount the ATTESA pump in other locations?

      By AnimalGarage · Posted

      According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • GTSBoy
      R34 25GT Engine Light 21

      By GTSBoy · Posted

      If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...