Jump to content
SAU Community

Recommended Posts

Help! I have purchased an R32 GTS25 and am experiencing some engine problems. These problems include; occasional missing, occasional stalling and the occasional hesitation (by which I mean when I am accelerating the engine almost hiccups, it cuts out then comes back in accelerating). I have taken it to the local Nissan Dealership who originally diagnosed it as a faulty CAS. So I got that replaced and it didn't do too much, just made these problems occur less. However they still do occur... So I took it back they performed another diagnostic check and the DTC came back OK....

How do I fix these problems!! They suggested coils (which I replaced with "newer" 2nd ones 2 months ago), Igniter, AFM or the ECU?? Which would be the best plan of attack? Or is there something they missed??

Cheers Rich

Link to comment
https://www.sau.com.au/forums/topic/406478-help-rb25de-problem/
Share on other sites

did the coils make any difference at all? there is always the chance that they were no better than the ones you replaced. the ignitor is also worth looking at (if it is a serious 1 r33)

if possible, if you have a mate that also has a r33 you could try swapping parts with his car and seeing if you can isolate the problem part

No cat converter so thats unlikely haha, and no I also replaced the fuel filter about 2 months ago aswell so again unlikely

Yes the coils made a slight difference but I mean it wasn't like it was a game changer as the problem is still there. No, no mate that I could swap parts with, but will look into the igniter as yes it is a series 1 RB25de

iv got a very similar problem wiv my rb30 iv replaced all the same shit including distributor cap and rotor , leads n AFM and the power transistor next 2 the distributor. some1 has mentioned problems with the actual throttle body not sure though. when it plays up can u smell unburnt fuel?? mine stinks of it wen it stars randomly running like shit

If I do (most probably) end up replacing my AFM what would be the best replacement? As am browsing through trademe and to me they are all the same thing just different colours :/

As long as it's green sticker it should be the same. Double check the part number on yours matches the one your buying. 22680-02U00-?

http://www.skylinesaustralia.com/forums/topic/113284-fixing-your-rb26-afms/

  • 3 weeks later...

UPDATE:

Now my car doesn't start at all :/ It turns over but doesn't want to start, so I replaced my ignitor and resoldered the joints on my AFM (to try solve the original problem) but nothing changed, it still turns over with no motivation to start. Will be taking it into an auto electrician tomorrow hopefully.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...