Jump to content
SAU Community

Recommended Posts

Hey i really need to know who can rechip the standard ECU in an R32 GTS-T.

In sydney preferably!

I cant find anyone other than SAS, although i have heard nothing but good reports about their work, i really cant justify spending $1500 for a rechip, as its possible to buy and tune a PFC at that price.

so anyone who knows a workshop in sydney that performs this work please let me know!

cheers!

Link to comment
https://www.sau.com.au/forums/topic/40687-who-retunes-std-r32-ecus/
Share on other sites

where can you get a PFC for a R32 paid for and tuned at $1500??

I believe my car has been tuned by toshi, previous owner had it done when new turbo was put on. Its a R34 turbo, but has a R33 map. I want to get it tuned for a R34 turbo, because correct me if im wrong but they different turbo's (same size i know)

well you can get a PFC from Nengun and Greenline for about $1,000 and quite a few workshops will tune the PFC for around $400-$500.

If i had that sort of money for my engine management i wouldnt hesitate, unfortunately my budget on thie area is more like $750.

and regarding turbo, i dont think there is a huge difference between the R33 and R34. well not enough to warrant spending $1500 on a rechip. just go buy a HKS2530 for that :cheers: thats what i got, and im making 210rwkw on the standard ECU. will see what a tuned ECU can produce.

interesting.

well i was running 1bar also. i have upgraded fuel pump and reg, but standard injectors.

but i havent skimped on any of my other upgrades. i did use an SAFC II but didnt gain much up top with that, more midrange.

i posted my dyno sheets etc after installing the 2530. and got 280rwhp (208rwkw) ill do a search and find it again, it was actually cutting out at around 5800rpm (maxing out AFM i signal think) otherwise ill re-scan it and post it tomorrow.

My car has always made pretty good power, even with the standard turbo it made 220rwhp (165rwkw) at a dyno shoot, there were a couple of others running similar mods that didnt even get over 200rwhp.

Could you think of any reasons why it makes more? not that im complaining!

I guess your ECU probs are robbing you a fair bit of power. whats the prob with it?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...