Jump to content
SAU Community

Sau Merch - Rnd 2

R31Nismoid

By R31Nismoid,
in Computer Art

 Share

Recommended Posts

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

All,

We are still looking for more fashion oriented type designs. These items need to be sellable at stalls at events as well as the SAU Online store.

it seems the direction we are trying to take people down has not quite been reached at this stage. Some examples of the ones that are getting close to the mark are as follows to give you an idea of what we are thinking.

Unfortunately a lot of the designs were not marketable, and that's the key aim of this - to promote and further SAU :)

post-709-0-97202500-1345258567_thumb.jpgpost-709-0-42427200-1345258510_thumb.jpgpost-709-0-52588800-1345258519_thumb.jpgpost-709-0-10612700-1345258523_thumb.jpgpost-709-0-10574900-1345258527_thumb.jpgpost-709-0-31482100-1345258532_thumb.jpgpost-709-0-42061200-1345258536_thumb.jpgpost-709-0-67480000-1345258541_thumb.jpgpost-709-0-41009000-1345258563_thumb.jpgpost-709-0-57761900-1345258558_thumb.jpgpost-709-0-95298600-1345258550_thumb.jpgpost-709-0-04865700-1345258546_thumb.jpg

Just to re-cap:

We are looking for the following items only at this stage:

3 x fashion t-shirt designs - Can be front only, or front/rear designs

1 x long sleeve shirt designs (for motorsport boys) - SAU logo or variation on left breast, incorporate the URL and whatever else

1 x hoodie design - Free range here, go as mild or wild as you like

1 x cap design - A good cap design is simple, but effective. Cap will need to have URL on it.

Cash that will be given out for designs chosen listed below. You will also get a free merchandise item that your design goes onto :thumbsup:

t-shirt: $100ea ($300 total)

Long sleeve: $100

Hoodie: $100

Cap: $80

For the Motorsport tops, please leave the sleeves spare. The plan is to put SAU Trader logo's down the arms for those that would like to come on-board. They will be supplied to whomever at a later stage once we decide on the designs.

So please get to your designs and post them in this thread. Christian will have the ultimate say, however there will be a 'shortlist' of a few designs, which will then feature in a Poll to gauge interest.

Link to comment
https://www.sau.com.au/forums/topic/407273-sau-merch-rnd-2/
Share on other sites
R31Nismoid Grand Master

R31Nismoid

Posted
  • Author
Posted

They wouldn't sell as well as we envisage they need to :)

The above designs are good and on the right path. It'll just be a case of chucking designs together and then a few will be "BAM Awesome" type thing if they keep going the way of the above examples. I'd suggest perhaps getting in contact with a few photographers perhaps for some great images.

There are a few here on SAU. You'd probably need to split the $$$ with them, but hey - if you have a clean sweep that works nicely ;)

Link to comment
https://www.sau.com.au/forums/topic/407273-sau-merch-rnd-2/#findComment-6492991
Share on other sites
luke gtr Grand Master

luke gtr

Posted
Posted

Yeah the RB26 shirt is definately well down the lines of what we are looking for.

A nice fashion style print that you'd actually wear out in public in the street and not just to a car/SAU event type thing.

there's life outside of car stuff now?

Link to comment
https://www.sau.com.au/forums/topic/407273-sau-merch-rnd-2/#findComment-6498909
Share on other sites
R31Nismoid Grand Master

R31Nismoid

Posted
  • Author
Posted

Some of them were included in the first post, I noted down who submitted what :)

But it's the age old case of just because someone says they will buy it, doesn't mean they actually will when the time comes so we have to decide carefully.

We do like the ones you posted no doubt, that's why they are there!

Hoodie ones will be harder to do with that print maybe from costing point of view (im finding out).

Link to comment
https://www.sau.com.au/forums/topic/407273-sau-merch-rnd-2/#findComment-6509922
Share on other sites
  • 2 weeks later...
  • 2 weeks later...
  • 4 weeks later...
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • sonicii
      Could it really happen......

      By sonicii · Posted

      I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • MBS206
      Could it really happen......

      By MBS206 · Posted

      Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • MBS206
      R34 25GT Engine Light 21

      By MBS206 · Posted

      Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...