Jump to content
SAU Community

Recommended Posts

All,

We are still looking for more fashion oriented type designs. These items need to be sellable at stalls at events as well as the SAU Online store.

it seems the direction we are trying to take people down has not quite been reached at this stage. Some examples of the ones that are getting close to the mark are as follows to give you an idea of what we are thinking.

Unfortunately a lot of the designs were not marketable, and that's the key aim of this - to promote and further SAU :)

post-709-0-97202500-1345258567_thumb.jpgpost-709-0-42427200-1345258510_thumb.jpgpost-709-0-52588800-1345258519_thumb.jpgpost-709-0-10612700-1345258523_thumb.jpgpost-709-0-10574900-1345258527_thumb.jpgpost-709-0-31482100-1345258532_thumb.jpgpost-709-0-42061200-1345258536_thumb.jpgpost-709-0-67480000-1345258541_thumb.jpgpost-709-0-41009000-1345258563_thumb.jpgpost-709-0-57761900-1345258558_thumb.jpgpost-709-0-95298600-1345258550_thumb.jpgpost-709-0-04865700-1345258546_thumb.jpg

Just to re-cap:

We are looking for the following items only at this stage:

3 x fashion t-shirt designs - Can be front only, or front/rear designs

1 x long sleeve shirt designs (for motorsport boys) - SAU logo or variation on left breast, incorporate the URL and whatever else

1 x hoodie design - Free range here, go as mild or wild as you like

1 x cap design - A good cap design is simple, but effective. Cap will need to have URL on it.

Cash that will be given out for designs chosen listed below. You will also get a free merchandise item that your design goes onto :thumbsup:

t-shirt: $100ea ($300 total)

Long sleeve: $100

Hoodie: $100

Cap: $80

For the Motorsport tops, please leave the sleeves spare. The plan is to put SAU Trader logo's down the arms for those that would like to come on-board. They will be supplied to whomever at a later stage once we decide on the designs.

So please get to your designs and post them in this thread. Christian will have the ultimate say, however there will be a 'shortlist' of a few designs, which will then feature in a Poll to gauge interest.

Link to comment
https://www.sau.com.au/forums/topic/407273-sau-merch-rnd-2/
Share on other sites

They wouldn't sell as well as we envisage they need to :)

The above designs are good and on the right path. It'll just be a case of chucking designs together and then a few will be "BAM Awesome" type thing if they keep going the way of the above examples. I'd suggest perhaps getting in contact with a few photographers perhaps for some great images.

There are a few here on SAU. You'd probably need to split the $$$ with them, but hey - if you have a clean sweep that works nicely ;)

Link to comment
https://www.sau.com.au/forums/topic/407273-sau-merch-rnd-2/#findComment-6492991
Share on other sites

Yeah the RB26 shirt is definately well down the lines of what we are looking for.

A nice fashion style print that you'd actually wear out in public in the street and not just to a car/SAU event type thing.

there's life outside of car stuff now?

Link to comment
https://www.sau.com.au/forums/topic/407273-sau-merch-rnd-2/#findComment-6498909
Share on other sites

Some of them were included in the first post, I noted down who submitted what :)

But it's the age old case of just because someone says they will buy it, doesn't mean they actually will when the time comes so we have to decide carefully.

We do like the ones you posted no doubt, that's why they are there!

Hoodie ones will be harder to do with that print maybe from costing point of view (im finding out).

Link to comment
https://www.sau.com.au/forums/topic/407273-sau-merch-rnd-2/#findComment-6509922
Share on other sites

  • 2 weeks later...
  • 2 weeks later...
  • 4 weeks later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
×
×
  • Create New...