Jump to content
SAU Community

Recommended Posts

The most I got to on SLDL was 120x10 before switching to off the ground. They were certainly tough, particularly on grip because you can't rep reset like off the ground. Great for people with limited flexibility too.

Do you guys do any grip specific training or just let the compound pulls do their work over time? Is there such an exercise as just standing there in a lockout until your grip starts to give way?

Didn't do the week 11 of the PPP 180kg deadlift but did the following;

60 x 5

100 x 5

140 x 5

150 x 3

160 x 3

170 x 1

180 x 1

Got my 180kg PB! It was nice seeing 4 x 20kg plates each side lol. Am absolutely wrapped with that.

Weighed in today at 78.9kg so lightest I have been in 15 years yet have lifted more than I ever have.

Didn't do the week 11 of the PPP 180kg deadlift but did the following;

60 x 5

100 x 5

140 x 5

150 x 3

160 x 3

170 x 1

180 x 1

Got my 180kg PB! It was nice seeing 4 x 20kg plates each side lol. Am absolutely wrapped with that.

Weighed in today at 78.9kg so lightest I have been in 15 years yet have lifted more than I ever have.

it's a good reward when you see the numbers go up

Didn't do the week 11 of the PPP 180kg deadlift but did the following;

60 x 5

100 x 5

140 x 5

150 x 3

160 x 3

170 x 1

180 x 1

Got my 180kg PB! It was nice seeing 4 x 20kg plates each side lol. Am absolutely wrapped with that.

Weighed in today at 78.9kg so lightest I have been in 15 years yet have lifted more than I ever have.

Grats dude! :)

192.5/100/210 - 502.5 at 87.9kg

2.5kg PB / 10kg worse than PB / 10kg worse than PB.

5kg lighter bodyweight.

Happpy with the sq PB.

The others are still weak but it's as good as I could get them since last injuries.

Hoping to improve SQ and deads by June.

Bench will prob stay the same cause I won't be training it much if at all.

Once again, I hate wraps.

so so much pain.

.

Edited by TTT

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • End game is to: - Remove all the slop from old worn parts - Adjust setup so that the wheels actually fit and the car is drivable (currently it is not because of the extreme rubbing on the guards).   Progress over the last couple of days, removed the rear hubs! Next steps: - Buy bushings - Replace bushings/bearings on hub - Reinstall
    • Cracked deck  And other cam snap stuff   
    • A few random issues have popped up since my last update. My WMI pressure sensor failed within about 10 minutes of it seeing liquid. It was a 20$ China special, so I'm not surprised. My name brand replacement should arrive today.  My power steering assist also decided to crap out last weekend. The usual, works for about 60 seconds after starting the car then I lose it. I dusted off my old copy of NDS and connected to the HICAS ECU. Code 4 for assist solenoid.... I tested the solenoid and it's fine.  I knew the day where my HICAS ecu would crap out would come, and I welcome it. It was the last HICAS part on the car that is now in the bin. I've ordered an SSR and I will control the power steering solenoid with my Haltech ecu. It will be nice to have proper speed referenced assist again after all these years.   
    • Haha I just finished the last season of TPB: Jail last month. I'm happy they're still pumping out episodes. 
×
×
  • Create New...