Jump to content
SAU Community

Recommended Posts

Poor fella must be devastated, hes lucky he didnt get hurt more from the bar falling on him.

He must have some sort of underlying bone issue. Especially when you consider that he lifts 4 times or more a week and should have really good bone density due to the stress of lifting stimulating appositional bone growth an remodeling.

Edited by Mitcho_7

sooo I have suspected disk prolapse between L4 and L5... spine is a long way out, I lean to my left which is probably what has caused it... my lumbar is also very compressed, along with some other more minor issues in my mid back and neck

I have 4 weeks of treatments twice a week... Chiro pretty confident he can fix me up in that time and reckons I'll come back much stronger... thinks I've been leaving a lot of strength on the table being as misaligned as I am... I didn't ask if I'll make Nats, I guess we'll wait and see

Happy to train through knee, shoulder, elbow pain etc but don't want to stuff around with my back... will be doing what he says (he's a fellow powerlifter)

have the all clear to keep benching/pressing... just no overhead work

Jason Mawby

http://www.mawbychiropractic.com.au/

He won't adjust you without a full spinal xray... They are in Rosebud and will refer you to an xray place down there but I'm sure you could get them done anywhere

Went and saw him first but I guess you could have some xrays done first

sooo I have suspected disk prolapse between L4 and L5... spine is a long way out, I lean to my left which is probably what has caused it... my lumbar is also very compressed, along with some other more minor issues in my mid back and neck

I have 4 weeks of treatments twice a week... Chiro pretty confident he can fix me up in that time and reckons I'll come back much stronger... thinks I've been leaving a lot of strength on the table being as misaligned as I am... I didn't ask if I'll make Nats, I guess we'll wait and see

Happy to train through knee, shoulder, elbow pain etc but don't want to stuff around with my back... will be doing what he says (he's a fellow powerlifter)

have the all clear to keep benching/pressing... just no overhead work

Did he say if the heavy lifting might have contributed to it?

Did he tell you to stop the heavy lifting or go easy for a while?

I hurt it while deadlifting, no doubt about it... only because I was lifting whilst badly out of alignment... I'm sure I would not have had any issues had I been seeing someone to have maintenance work done instead of waiting til I hurt myself

I pulled 200kg x 5 for 3 sets... then deficit deadlifted 180kg x 8 and 160kg x 13 (to failure)... I'm pretty sure I did it in that last set... I was fatigued and let my form go, plus I was lifting from a deficit and it's already hard for me to get down to the bar and setup correctly... I was then very stiff in that area for the next week but kept lifting anyway... on my next DL session I warmed up a lot because of the stiffness but everything felt heavy... my top sets were supposed to be 215kg x 3 x 3... I pulled the first set and only barely managed it... felt like I strained something and immediately it started to hurt

he said no deads or squats for the time being... no overhead lifting or anything that compresses my spine... I'll get the treatment and as soon as he clears me I'll get back to it... I'm already seeing improved movement every day and I've always healed quickly so fingers crossed

Yeah hope it gets sorted soon.

I guess the qn to ask is are you still keen on lifting big weights now this has happened to you?

After I hurt myself, and nowhere near anything like you did, I qn whether there is any need to lift heavy. You compete but I don't.

I probably shouldn't have these thoughts in this thread................. Lol

it sounds a lot worse than it is... I'm really not in that much pain, just uncomfortable bending over and sitting for long periods

I can't wait to lift heavy again... I don't feel right not having squatted for nearly two weeks lol

However I won't be lifting heavy unless everything feels right in that area and I get the all clear from the Chiro... I won't ignore it again

I had this week off except for a short bench session but I'll be back into 4-5 sessions a week next week... lot's of bench pressing, supported rows, pull ups, dips etc

TTT: thanks mate... I'll be pretty gutted if I miss Nats... never thought I'd ever do a bench only comp lol! But if I'm not healthy then I'll live to lift another day... I'm sure there will be some other comp I can do later in the year

will be a pity because I hadn't missed a rep in training and was programmed for a 610kg total... think I could nudge 620kg fully healthy too

shit happens, people have come back stronger from a lot worse injuries

Jason Mawby looks after our entire team, he has totalled 600kg@100kg, his wife also competes.

He fixed up Nina and Max, they still get alignments every fortnight, I think he has around 30 clients from PTC

Emad is out of hospital. What was supposed to be a 1hr op lasted 3. His bones are like concrete, they struggled to drill through them

Dr Bruce Reid and Dr Peter Larkins believe there was a stress fracture there that the MRI didnt pick up

He has a titanium rod running through his humerus now. He was in the gym today.

Nick, you'll be fine if you listen to Jason, we work together, we have a 100% success rate. Max started squatting an empty bar after Jason realigned him, he is about to squat 250kg x 4.

You wont recognise the place when you walk in lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
    • Ah coolant overflow, previous discussions make way more sense now lol. 
×
×
  • Create New...