Jump to content
SAU Community

Recommended Posts

Hey all been my dream for awhile to do a 26 powerd rx7, I know all the pro and cons, I have the engine ect ready just want to know ha some one done this in Australia????? Or tried? I'm ginna give it a hot go but abit of guidance would be so grateful so please any help would be awesome!!!

Link to comment
https://www.sau.com.au/forums/topic/408045-rb26-fd-rx7/
Share on other sites

  • Replies 63
  • Created
  • Last Reply

Top Posters In This Topic

I measured up a series 8 a couple of weeks ago for an rb30/26 conversion.

After we spent a couple of hours going over what was required the owner decided to settle for a 20b instead.

The list of parts to be custom made was massive and very labour intensive.

Are you capable of doing alot yourself?

Link to comment
https://www.sau.com.au/forums/topic/408045-rb26-fd-rx7/#findComment-6507232
Share on other sites

Really? Damn it, I was gonna get someone else to do it I want it to be perfect look amazing got a couple of people interested in wanting to do it but they havnt done it before, what was some of the custom parts? Im a mechanical engineering fitter so I work 6 days a week so not much time ether, I've got 7k budget after buying the gearbox,rb26,custom rear whell drive sump ect. Hope it's not for nothing :(

Link to comment
https://www.sau.com.au/forums/topic/408045-rb26-fd-rx7/#findComment-6507475
Share on other sites

Why don't you do a LS1 mate?

Cheaper and you can buy an over the counter kit from the US for a full installation. I know someone who did it and it was flawless and you can DIY it basically as it's a full installation kit. By the time you sell all your bits + the 7k you already have - you'd EASILY have thick wad of spare change.

Lighter motor, will make 260-280rwkw with a big cam and the stock ECU can be tuned easily... Can't argue the viability in the value factor and it's a fairly rare conversion still :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/408045-rb26-fd-rx7/#findComment-6507523
Share on other sites

That's true to ^^ and would sound awesome!! Haha mite have to look at that to, I was gonna go RB cause Ive had them most of my life haha, what's your thoughts or 2jz? I can buy over the counter kit for them to but they don't look as good RB :(

Link to comment
https://www.sau.com.au/forums/topic/408045-rb26-fd-rx7/#findComment-6508223
Share on other sites

If your going to do a big 6 cyl conversion why not look at measuring the car up for a barra xr6 turbo.

Exhaust is already on the correct side, engine bay is long enough.

Sumps come in front or rear pan (BA/BF or FG) any aftermarket ecu can run one, parts are cheap and the engines are reliable/Grunty.

The major issue you have is engine height, the rx7 lacks depth which was the major concern with the rb26. 2jz and barra will be worse which is why the ls1-ls7 is actually a good idea.

Link to comment
https://www.sau.com.au/forums/topic/408045-rb26-fd-rx7/#findComment-6509490
Share on other sites

Put the 26 in a old mustang. Dom and his boys have done it. Thing drifts awesome.

Dom is crazy! he lives his life a quarter mile at a time. Nothing else matters: not the mortgage, not the store, not his team and all their bullshit. For those ten seconds or less, his free.

Link to comment
https://www.sau.com.au/forums/topic/408045-rb26-fd-rx7/#findComment-6510084
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Need to see other side of PCB in that area...ie; I don't see any thru-hole mounting, just soldered vias (smd zeners in SOT23 have 3 legs but only 2 are used, as reflected by PCB tracks)
    • 4 to 5 is fine. It will be slow, but that's better than blowing turbos. I don't have a PS pump idle up solenoid on my car, because... I think when we put the Neo in we retained my R32 lines. But.... From inspecton of the R34 vacuum hose diagram, you can see that the solenoid needs to be connected to the turbo inlet as source of clean air) and the plenum (as source of vacuum - which is the place for the air to flow to to cause the idle to increase). So 3 to 1 is VERY WRONG. 3 should go to either the turbo inlet, or the plenum. Follow the other hose from the PS solenoid and if it goes to the plenum, then your 3 goes to 2 2 would also serve as a bleed port for a boost solenoid.
    • Pull them out and pull more apart. You can't do shit with them still bolted to the floor of the car.
    • Yes it is. ZD1 is on the other side of the board. Where ZD1 is marked is clearly opposite a 2 pin device. Our 3 pin device here is not a ZD.
    • Alright, a little update on this... I called Fulcrum, who used to be the distributor in Australia. No Bueno, they don't service them anymore.  Called shock works, who don't service them but offered to dyno the shocks for performance, and suggested DNA in Sydney might service them.  Called DNA, who also do not service them and basically said they try to steer customers away from tein for this exact reason these days- there is just no support for them anymore apparently.  Both SW and DNA said they are a not necessarily a bad product, but they just don't service the brand or know anyone who does service the brand anymore.  So... I could keep calling around but at this point I think I'll probably just spring for the shockworks product, unless anyone here knows anything.  Cheers 🍻 
×
×
  • Create New...