Jump to content
SAU Community

Recommended Posts

1992 HCR32 GTST - REAR END DAMAGE.

COLOUR: GUN METAL GREY

Location: Holsworthy NSW 2173

PICKUP IS PREFERRED, HOWEVER POSTAGE CAN BE ARRANGED AT **BUYERS** EXPENSE.

Contact; PM is preferred or SMS to 0435 120 602.

If you wish to talk over the phone feel free to try ringing me, however reception is bad and i cannot answer my phone during work hours. Also pretty busy on weekends.. so good luck! ;)

:)

If someone wants the shell whole, let me know and we can discuss a price.

Please ask for parts if not listed, the whole rolling shell is available (bar a few items).

I will list the big ticket items.

Car needs to remain rolling for the time being, so suspension / 5 stud / brakes will be sold last.

Everything is as pictured, if you require more pictures please notify me so that i can attain them for you.

Please NOTE ** ENGINE AND GEARBOX + TAIL SHAFT ARE NOT AVAILABLE.

Please NOTE ** ALL PANELS ARE GUNMETAL GREY, EXCEPT CARBON FIBER BONNET .. IT LOOKS LIKE CARBON FIBER..

AVAILABLE NOW;

Front bar as pictured (pretty average condition, would suit drift pig) - $50

Front Reo - $100

Front Sway bar - $40

Rear Sway bar - $40

Smoked out indicators (mint condition) - $80

LH + RH Doors (passenger door near mint, drivers side average condition - $100 ea.

RB26 FRONT PIPES (twin 2.5" inlets to approx 3" rear) - $150

Aircon / Heater Vents all available except drivers lower vent - $100 for all (purchaser will need to remove most likely) ??

LH + RH OEM Indicators (mint) - $150 pair

Windscreen Washer bottle, not leaking - $20

Coolant Overflow Resevoir, not leaking - $20

Power Steering Resevoir, not leaking - $20

Drivers and Passenger seats, passenger in good condition, driver side has typical tear in bolster apart from that good condition nice and clean etc - $80 for pair

Rear Seat excellent condition - $50

Centre Console in ok condition - $50

Faschia Surround, one clip broken apart from that decent condition - $50

Seatbelts FRONT ONLY ADR APPROVED - $20

Rear Window Wiper Motor / Blade Assy - $20

Skyline Door Trims, both in good condition - $40 pair

Fuel Flap - $20

GTSt OEM Spoiler w/ Integrated brake light - $80

2 x K&N Pod Filters suit RB26 - $150

Standard LSD, still nice and tight - $200

ALL GLASS AVAILABLE IN GOOD COND - BUYER REQUIRED TO ORGANISE REMOVAL PRICE: TBA ??

AVAILABLE LATER;

Tien Super Streets - condition TBA - price TBA

R32 GTR Front + Rear Brakes w/ DBA4000 Series Rotors front and rear with pleanty of life. Unsure what pads are on there but they are yours regardless.

Can also sell 5 stud conversion / hubs etc.. -

$400 for Calipers / Rotors / Pads.

Hubs will be extra.

I also have some gear that i'm not sure i want to sell.. however let me know if your really keen.. and willing the pay the coin.

Genuine N1 GTR Headlights, Immaculate - $350 pair

Mu's Secret Carbon Fiber Bonnet w/ bonnet pins - $100

LH + RH Side skirts (good condition) - $200 pair

LH + RH Guards in decent condition - $200 pair

R32 GTR NISMO CLUSTER 260kph / 10k rpm ODO 78568 - $300

Trust Front Mount I/C NO PIPING - $150

post-75263-0-55515600-1346660269_thumb.jpgpost-75263-0-89629900-1346660279_thumb.jpgpost-75263-0-04067300-1346660287_thumb.jpgpost-75263-0-18387000-1346660307_thumb.jpgpost-75263-0-35505900-1346660327_thumb.jpgpost-75263-0-43567300-1346660347_thumb.jpgpost-75263-0-24654900-1346660476_thumb.jpgpost-75263-0-10291300-1346660484_thumb.jpgpost-75263-0-20544300-1346660492_thumb.jpgpost-75263-0-86130200-1346660499_thumb.jpgpost-75263-0-69831300-1346660507_thumb.jpgpost-75263-0-67330000-1346660514_thumb.jpgpost-75263-0-15262000-1346660520_thumb.jpgpost-75263-0-68252000-1346660539_thumb.jpgpost-75263-0-48994800-1346660547_thumb.jpgpost-75263-0-75714200-1346660554_thumb.jpgpost-75263-0-15632800-1346660561_thumb.jpgpost-75263-0-71851500-1346660567_thumb.jpgpost-75263-0-20569800-1346660578_thumb.jpgpost-75263-0-86347300-1346660584_thumb.jpgpost-75263-0-36257700-1346660627_thumb.jpgpost-75263-0-27374900-1346660633_thumb.jpgpost-75263-0-37458600-1346660639_thumb.jpgpost-75263-0-98317700-1346660646_thumb.jpg

Edited by Willis
Link to comment
https://www.sau.com.au/forums/topic/408441-syd-stripping-1992-hcr32-gtst/
Share on other sites

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Hey man, im interested in your N1 lights, however i would like to make sure they ARE genuine.

Are the clips that hold the GTR grille on steel and screwed on, or are they plastic and actually moulded into the light itself?

I believe they are plastic and molded into the light itself.. i will get a specific photo of the mount for you tomorrow. Pretty sure they are legit.

Smoked out indicators (mint condition) - SOLD

Drivers and Passenger seats, passenger in good condition, driver side has typical tear in bolster apart from that good condition nice and clean etc - SOLD

Smoked out indicators (mint condition) - SOLD

Drivers and Passenger seats, passenger in good condition, driver side has typical tear in bolster apart from that good condition nice and clean etc - SOLD

Front Reo - SOLD

LH + RH Side skirts (good condition) - SOLD

Rear PODS - SOLD

Some more photo's.

Trust intercooler is a bargin. Not pretty but doesn't leak, was running on 240awkw 32 GTR..

post-75263-0-63594700-1347354302_thumb.jpgpost-75263-0-65134900-1347354321_thumb.jpgpost-75263-0-81286800-1347354340_thumb.jpg

And the K and N filters / intake piping?

post-75263-0-71993500-1347354354_thumb.jpgpost-75263-0-18126400-1347354369_thumb.jpg

Want photo's of anything else? Hit me up.

Willis.

SOLD - Indicator Stalk

SOLD - Climate control cabin temp sensor

SOLD - Smoked out indicators (mint condition)

SOLD - Front Reo

SOLD - Drivers and Passenger seats, passenger in good condition, driver side has typical tear in bolster apart from that good condition nice and clean etc

SOLD - Rear PODS

SOLD - LH + RH Side skirts (good condition)

Also price rise on Carbon Fiber bonnet, asking $400 (been informed that the damage is only cosmetic, and that carbon fiber is apparently quite valuable..)

and; Front seat belts ADR approved, asking $50

Price reduction on "N1 GTR Headlights" - I've been informed that these aren't "N1" headlights as they don't have the bracket for the grill.

As such price is reduced to 250 ono.

Sorry for lies!

Edited by Willis

SOLD - Indicator Stalk

SOLD - Climate control cabin temp sensor

SOLD - Smoked out indicators (mint condition)

SOLD - Front Reo

SOLD - Drivers and Passenger seats, passenger in good condition, driver side has typical tear in bolster apart from that good condition nice and clean etc

SOLD - Rear PODS

SOLD - LH + RH Side skirts (good condition)

PENDING PAYMENT - Bare Shell (not rolling)

PENDING PAYMENT - LH + RH Doors (passenger door near mint, drivers side average condition

Price drop on apexi filters; now - $50.

Hey mate, after the brakes if theyre still for sale?

Thanks

Hey budd, yep they are yours pending pickup along with the 5 stud hubs etc.

Hey,

Was wondering if you have the starter motor? And how much you wanting for it?

Cheers

Sorry mate, all the engine / accessories are gone!

Hey mate,

Saw some one asking about a standard steering wheel, just wondering if it is for sale how much and pictures if possible.

pm me if still for sale

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...