Jump to content
SAU Community

Recommended Posts

i know of several cases where people with mines ecu's have grenaded motors while running stock boost. Its not the AFR's that are the problem on mines ecu's, its the timing maps (which is why they generally make a car feel GREAT! that much timing brings it alive! but dangerously)

Yea...Ive seen one run ridiculous timing on low load. Was up to high 50s :w00t:

  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

Iv always been interested to know whether Mines ecu's were actually truly a good and relatively safe tune on the vehicle it was originally tuned for and any other things the tuners might have done to make it work in some more safe way. Or were they always 'go-GO-BOOM' boxes...

Iv always been interested to know whether Mines ecu's were actually truly a good and relatively safe tune on the vehicle it was originally tuned for and any other things the tuners might have done to make it work in some more safe way. Or were they always 'go-GO-BOOM' boxes...

Guessing it has to do with higher quality fuel in Japan.

100 RON is available in Japan, 98 RON is available in Australia. Higher the RON, higher the knock resistance. In simple terms, the Mine's basemap at the most basic level will be based about the knock resistance of 100 RON and what can be safely done with it. Put in a lesser fuel (98 RON) and it's obvious what is going to happen.

Shell phased out V-Power Racing in 2008, it was the only 100 RON fuel that I was aware of, even then it was regular 98 + 5% ethanol to bring it up to 100. Apparently United have 100 RON (haven't seen any in SA), but it's 10% ethanol.

Shell phased out V-Power Racing in 2008, it was the only 100 RON fuel that I was aware of, even then it was regular 98 + 5% ethanol to bring it up to 100. Apparently United have 100 RON (haven't seen any in SA), but it's 10% ethanol.

I've seen 100 at united, but only once.

Lavington united just out side albury is the only one I've seen

probably a good thing im thinking?

Not many people realise but our motors are frequently experiencing mild detonation events, its impossible to tune out all cases of det, hence why detonation is only deemed an issue above a certain amount. They are so smal they cannot be heard by the ear and they dont present any immediate threat to the motor. But it isnt good for it bottom line. Increasing your octane can help to reduce this.

What i am not sure about is how the effect of that level of ethanol content will effect a motor tuned for 100% petroleum. Another person might be able to answer that...

yes... but octane boosters are known to foul sensors- i.e. your 02 sensors in the exhaust as well as wear spark plugs quicker.

Id say put some in myself, iv never had anyt trouble with it tho i use the 'dyno tabs' which are meant to cause this sort of problem less.

Otherwise dont hammer it or even boost it if you can help it. Nor drive it in hot condiitons or with a heap of people in the car.

Its not like this ecu is likely to harm your motor between now n the time you get a new ecu and tune- 'its made it this far already'. But it would sure be a shame to have ur new car and its built motor go up in flames because of it...

Edited by jjman

A fair few United in VIC now have 100RON, have had most of the year and I used it religiously. Could certainly notice a differene with the added RON and the slight change in mixture due to Ethanol.

I give it the big thumbs up if you can get your hands on it. Economy was the same :)

Shell phased out V-Power Racing in 2008, it was the only 100 RON fuel that I was aware of, even then it was regular 98 + 5% ethanol to bring it up to 100. Apparently United have 100 RON (haven't seen any in SA), but it's 10% ethanol.

Which United do you go to?

I haven't seen one without 100RON in over a year.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...