Jump to content
SAU Community

Recommended Posts

  • Replies 291
  • Created
  • Last Reply

Top Posters In This Topic

All parts are ready for pickup, most of you who are picking up would have been contacted, if not PM me.

Some parts have been damaged during shipping and I am currently trying to get a replacement sent. Damaged parts include:

- R34 Eyelids

- EG Spoon Lip

- ONE pair S2000 Side skirts extension

- S15 interior replacement

- GTT Cooling Panel

- R32 weathershields

Those who have ordered the bits that have been listed damaged above, will be contacted shortly later on. Those who require shipping, have been or will be PMed the total outstanding amount and shipping cost.

picked up my items yesterday. not too bad. took some photos for you guys.... hopefully fitment is pretty good.

I would have thought that the headlight intake would have had tabs on both sides but there isn't. We'll see how it goes when I try and fit it on and see how it goes on the track.

20130121_153014.jpg

20130121_153035.jpg

20130121_153046.jpg

not much to say about the coilpack cover. looks ok. hopefully the holes line up ok.

20130121_153153.jpg

I attempted to fit my r32 dmax style roof spoiler tonight with no luck :( It doesn't sit flush so I kept pushing down with sikaflex with a helper waiting but its so curvy that it wont stay down in all places at the same time, I had my tie downs ready at the wheels to hold it firm against the windshield but it was to fiddly for it. Is anyone in the Sydney region that is willing to help me out? Or any tips? Is it safe to use a heat gun perhaps on the spoiler without ruining anything? Lost here....

I think my n1 boot lip will fit okay, haven't attempted it yet but I'm hoping it wont be as bad..

Also when will the damaged in transit parts be estimated to be made up and sent back here?

I attempted to fit my r32 dmax style roof spoiler tonight with no luck :( It doesn't sit flush so I kept pushing down with sikaflex with a helper waiting but its so curvy that it wont stay down in all places at the same time, I had my tie downs ready at the wheels to hold it firm against the windshield but it was to fiddly for it. Is anyone in the Sydney region that is willing to help me out? Or any tips? Is it safe to use a heat gun perhaps on the spoiler without ruining anything? Lost here....

I think my n1 boot lip will fit okay, haven't attempted it yet but I'm hoping it wont be as bad..

Also when will the damaged in transit parts be estimated to be made up and sent back here?

Still waiting to hear from supplier.

As for the roof wing, check out this thread on JDMST:

http://forum.jdmstyletuning.com/showthread.php?45280-dmax-s15-roof-wing-help

Still waiting to hear from supplier.

As for the roof wing, check out this thread on JDMST:

http://forum.jdmstyl...-roof-wing-help

Thanks I will have a crack at it again sometime this week and when its all done will post up some photos. Might get some different stronger sikaflex too and try that out. Was using 227.

Will be doing your order soon plats, packing it properly and securely is the main problem right now. Do-able, though I'm making about 15 custom boxes from flat cardboards that won't crush, which is a pain. Got a few of the 33 grills out.

Recieved my R33 CF GTR style front grill yesterday. Item was well packed lots of bubble wrap to keep it safe.

Item itself I was happy with very light and the carbon was decent.

Fitment on the other hand was the downside, the grill will not fit without removing the rear tabs sticking out and doing a little DIY to make it sit on the car how you want it too. Anyone who is waiting on theres will know what I mean when they try and fit it on the car.

The grill itself lines up fine and once in place looks great fitment is good after DIY is finished.

Overall happy with the item and the result.

Recieved my R33 CF GTR style front grill yesterday. Item was well packed lots of bubble wrap to keep it safe.

Item itself I was happy with very light and the carbon was decent.

Fitment on the other hand was the downside, the grill will not fit without removing the rear tabs sticking out and doing a little DIY to make it sit on the car how you want it too. Anyone who is waiting on theres will know what I mean when they try and fit it on the car.

The grill itself lines up fine and once in place looks great fitment is good after DIY is finished.

Overall happy with the item and the result.

you just cut them off?

you just cut them off?

Yup i removed all 4 tabs. The top ones can probably be left on but the bottom ones have to go. As each grills tabs will probably slightly different angle/width i suggest you assess which ones need removing.

I found it easiest remove all 4 as i can then place the grill how i want it and not have the tabs restricting me.

The back tabs can be cut off with a dremel / wire cutters / flower cutter basically anything with a sharp blade and handles has the tabs are fiberglass and wont be hard to cut through.

Edited by DarkRyda

forgive me for being dumb here, but if you removed all the tabs how did you fit it man?????!

Imagination and creativity =).

I drilled 4 holes at the back, two at the top of the grill where the tabs used to be and another two at the bottom next to the mesh screws. Then you zip-tie the grill to the headlight. Placement of the holes and the Zip-ties are most important or it wont fit properly.

You could also go to bunnings and get 2 U-Shaped brackets bot 1 on each side and attach that to the headlights. With doing this the U brackets must be the correct size or the grill will stick out to much. The ziptie option is probably the easiest and cheapest.

Wow dude you car is porn. What rims are you running?

Thank you. PM sent as this question is off-topic

cool. mines a white car so itll stand out like a bitch if it dont fit

The fitment is good pretty much perfect if you install it correctly.

Btw don't bother trying to zip tie it from the mesh it wrecks the mesh and doesn't align properly, so save yourself the trouble as I tried it and it didn't work at all.

Just a note the mesh comes silver I painted mine matte black with a satin clear. Maybe since your car is white silver mesh would look better.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...