Jump to content
SAU Community

Recommended Posts

Hi Guys

What do you guys recommend for a A/T 2003 V35 coupe. An ECU or a Transgo A/T Shift Performance Kit?

I have been told the ECU will cost about $800-$900 fitted and the Transgo Shift Kit will cost $300 (not including labour cost).

So performance wise is there a very noticable difference?

Regards

Manny

Link to comment
https://www.sau.com.au/forums/topic/410691-ecu-vs-transgo-shift-kit/
Share on other sites

An ECU really won't do much unless you have serious mods that benefit from 'tuning' the ECU.

FYI the shift kit will cost $500+ to fit (incl. service and oil) by a shop - I hope you have included that in your equation.

Uprev gives you control over the gearbox to some extent.... But if you are to supercharge or turbo charge at a later stage you will still need a shift kit done.

$500 not including oil is a good price IMO.....just make sure you go to a workshop that has done a couple and knows what there doing....I've seen a heard a couple of horror stories of can do workshops that can't do! And don't let them use dextron for the oil...it will stuff the gearbox.

Uprev gives you control over the gearbox to some extent....

Yes it does.

So to some extent you could actually replicate what the transgo shift kit is doing Physically, but tuning the ECU to do it electronically. I have done it to my car, however I also have the transgo shift kit. So I am unsure how good you could actually replicate the results of the shift kit in tuning the line pressures the ecu tells the gearbox ecu to run.

However you also get the benifit of the tune. I don't know what the rwkw difference will be once you tune on a stock car, but you will get some benifit as well as losing the speed limiter, and setting the rev limiter to your desired limit. You may also chose to run upto 5 different ECU maps.

What ecu have you been directed too? If its a piggyback, then run far far away. Chances are the person who is giving you advice has NFI about these cars. Uprev tuner is 700USD. Dyno tuning is on top of that- and I would charge more than 100-200 to do the job.

^^^ Nope that price is not including the shift kit .... but remember a business workshop has significant thousands of dollars per week, every week, to pay for. Plus warranty if they stuff something up. In Adelaide we pay around $120 per hour for labour alone.

Are those prices including the shift kit? Otherwise I need to put my prices up. lol.

I was thinking that to Scott.....if that's the price not including the kit then your getting ripped IMO.

$500 fully fitted including the kit....not the oil. If your in Vic can't act Scott....NSW me.....other states :( ....ATM!

Uprev ftw if you know what your doing with tuning.

Edited by Jetwreck

What oil are people using when having the kit fitted? I gave the local gearbox shop close to my work which a couple mates who have had commo boxes rebuilt recommend a call. They can supply the shift kit for $460 as opposed to the $300 ish via ebay etc

The guy I spoke to said he had rebuilt a couple of boxes out of pathfinders which are the same RE5R05A box the 350z/V35 have. When I asked what oil he used he replied that he uses a synthetic oil he gets in bulk from Singapore which would cost me $7.5 per L and has had no issues with the RE5R05A boxes he has used it on..... This is a shop which has been around for 10+ years so id hope he is right :/

Mine was running generic Dextron III, although it has extra clutches installed in the baskets. I don't recommend it for a stock RE5.

I use the Nulon synthetic usually as it's proven and easy to find.

I bought a shift kit off ebays for like $250-$300 i think it was at the time and had a full service on the box and kit fitter for $200 from my local auto transmission shop, they used the genuine matic J fluid also from Nissan the guy had a half full bottle of it as a door stop to keep his office door open

I bought a shift kit off ebays for like $250-$300 i think it was at the time and had a full service on the box and kit fitter for $200 from my local auto transmission shop, they used the genuine matic J fluid also from Nissan the guy had a half full bottle of it as a door stop to keep his office door open

That's a win and a good price IMO!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
    • I suppose it was relatively stock too, the JZ motor handle most mods thrown at them without even breaking a sweat 
×
×
  • Create New...