Jump to content
SAU Community

Recommended Posts

Hi Guys

What do you guys recommend for a A/T 2003 V35 coupe. An ECU or a Transgo A/T Shift Performance Kit?

I have been told the ECU will cost about $800-$900 fitted and the Transgo Shift Kit will cost $300 (not including labour cost).

So performance wise is there a very noticable difference?

Regards

Manny

Link to comment
https://www.sau.com.au/forums/topic/410691-ecu-vs-transgo-shift-kit/
Share on other sites

An ECU really won't do much unless you have serious mods that benefit from 'tuning' the ECU.

FYI the shift kit will cost $500+ to fit (incl. service and oil) by a shop - I hope you have included that in your equation.

Uprev gives you control over the gearbox to some extent.... But if you are to supercharge or turbo charge at a later stage you will still need a shift kit done.

$500 not including oil is a good price IMO.....just make sure you go to a workshop that has done a couple and knows what there doing....I've seen a heard a couple of horror stories of can do workshops that can't do! And don't let them use dextron for the oil...it will stuff the gearbox.

Uprev gives you control over the gearbox to some extent....

Yes it does.

So to some extent you could actually replicate what the transgo shift kit is doing Physically, but tuning the ECU to do it electronically. I have done it to my car, however I also have the transgo shift kit. So I am unsure how good you could actually replicate the results of the shift kit in tuning the line pressures the ecu tells the gearbox ecu to run.

However you also get the benifit of the tune. I don't know what the rwkw difference will be once you tune on a stock car, but you will get some benifit as well as losing the speed limiter, and setting the rev limiter to your desired limit. You may also chose to run upto 5 different ECU maps.

What ecu have you been directed too? If its a piggyback, then run far far away. Chances are the person who is giving you advice has NFI about these cars. Uprev tuner is 700USD. Dyno tuning is on top of that- and I would charge more than 100-200 to do the job.

^^^ Nope that price is not including the shift kit .... but remember a business workshop has significant thousands of dollars per week, every week, to pay for. Plus warranty if they stuff something up. In Adelaide we pay around $120 per hour for labour alone.

Are those prices including the shift kit? Otherwise I need to put my prices up. lol.

I was thinking that to Scott.....if that's the price not including the kit then your getting ripped IMO.

$500 fully fitted including the kit....not the oil. If your in Vic can't act Scott....NSW me.....other states :( ....ATM!

Uprev ftw if you know what your doing with tuning.

Edited by Jetwreck

What oil are people using when having the kit fitted? I gave the local gearbox shop close to my work which a couple mates who have had commo boxes rebuilt recommend a call. They can supply the shift kit for $460 as opposed to the $300 ish via ebay etc

The guy I spoke to said he had rebuilt a couple of boxes out of pathfinders which are the same RE5R05A box the 350z/V35 have. When I asked what oil he used he replied that he uses a synthetic oil he gets in bulk from Singapore which would cost me $7.5 per L and has had no issues with the RE5R05A boxes he has used it on..... This is a shop which has been around for 10+ years so id hope he is right :/

Mine was running generic Dextron III, although it has extra clutches installed in the baskets. I don't recommend it for a stock RE5.

I use the Nulon synthetic usually as it's proven and easy to find.

I bought a shift kit off ebays for like $250-$300 i think it was at the time and had a full service on the box and kit fitter for $200 from my local auto transmission shop, they used the genuine matic J fluid also from Nissan the guy had a half full bottle of it as a door stop to keep his office door open

I bought a shift kit off ebays for like $250-$300 i think it was at the time and had a full service on the box and kit fitter for $200 from my local auto transmission shop, they used the genuine matic J fluid also from Nissan the guy had a half full bottle of it as a door stop to keep his office door open

That's a win and a good price IMO!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
    • Welcome! New member myself, but I had an R33 back in 2002. Best advice I could give, based on my experience: if you're running the factory turbo, be very conservative with boost. I made the mistake of just fiddling around with the boost controller and cranking the boost for fun, and the end result was my intake pipes popping off frequently from the constant deluge of oil that was being blown into the recirc by the stressed-out turbo, which itself was siphoning oil from the engine and farting it out both sides of its centre bearing (or something to that effect). If I could do it all again, I would have gotten a new turbo and had a tune dialled in professionally and then just left it alone! Funny you mention the metal shavings in the gearbox, as I had the same thing - the probe plug (magnetic drain plug, essentially) would come out caked with shavings. At least it was doing its job. Not sure if that's just sacrificial wear and part of the deal, or if my gearbox was shagged, but I wasn't abusing it. Enjoy the R33 - they're a dying breed, and if they weren't $35k+ on CarSales in Queensland, I might have picked up one of those again, instead of the 370GT I own now (though I'm loving the 370GT, that big 3.7L V6 just hits different).
    • Howdy folks. I owned an R33 back in 2002, which was thoroughly beyond my capacity (financially speaking) to maintain/insure, so we parted ways in 2004. Fast forward 21 years (to literally yesterday, in fact) and I'm now the proud owner of a 2007 V36 370GT. I'm happily surprised by how much power the VQ37VHR makes, compared to the RB25DET, considering the latter is turbocharged. I had planned to add a turbo at some point but I'm on the fence about whether I'll even need it (though I do love the sudden onset of extra torque). Any other 370GT owners around the traps, I'd love to hear about your experiences with this car (good and bad).
    • Perhaps the answer is... more jacks!* *proper jacks must be used.  
    • I NEVER think about using a scissor jack unless there is absolutely no other alternative. f**king things are dangerous, annoying and stupid.
×
×
  • Create New...