Jump to content
SAU Community

Recommended Posts

  • Replies 148
  • Created
  • Last Reply

Top Posters In This Topic

Hi mate, do you have the boot trim flap that goes over where the stock jack is stored? Do you have an assortment of interior trim clips I can get off you?

was the tailshaft causing any vibration when the car was running? (like worn joints or out of balance) might consider taking that off you.

Hi mate, do you have the boot trim flap that goes over where the stock jack is stored? Do you have an assortment of interior trim clips I can get off you?

was the tailshaft causing any vibration when the car was running? (like worn joints or out of balance) might consider taking that off you.

nah don't have the first two things, tailshaft- car wasn't running when i got it so don't really know

I'm after the 4 bolts that hold the gearbox crossmember up along with the 2 plates that go between these bolts and the bushes

bolts where flogged out when i pulled it from the car so no..

  • 3 weeks later...
  • 1 month later...

Rubber window seals that goes along the top of the door frames. More interested in passenger side but will take a pair ;)

Call me good looking I have it all

He mate have u got a bare shell by any chance if so can u please call me on 0432526472

Sorry mate they go to the scrap fast if not damaged

have you still got the gtr rear diff axles and hubs?

Yea got it all flick us a pm

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...