Jump to content
SAU Community

Recommended Posts

Hi Fellow Wagoners

I just installed a new fuel pump a Walbro 255l and all went together fine except Now when i first take off or put my foot down in any gear it seems like the fuel pump is struggling for a second then off we go,,,,,,,

i noticed after it was all done and installed that everyone is direct wiring them will this fix my problem......Or is this a different problem like the ecu cant work out whats going on with the new pump .

I did try and search for this but came up with nothing other than you should directly wire the fuel pump to get the max out of your new pump...

Any help would be much appreciated...

Cheers

Link to comment
https://www.sau.com.au/forums/topic/411684-small-fuel-pump-issue/
Share on other sites

Yeah I'm to sure what's going on I might have to pull it back out and check all the hoses make sure there is no splits or anything but its almost like there isn't enough power voltage for the first surge of fuel then it catches up....

I read the thread title & thought your issue was with a small fuel pump & that maybe a larger fuel pump would fix it. Then I read you already had a 255L Wallbro.. mmm, I get it.

Reminds me of the time the radio lost & found announced: "Lost, a large brown lady's handbag". I always wondered that had they'd given a description of the handbag, then the large brown lady would stand a better chance of getting it back.

:)

I read the thread title & thought your issue was with a small fuel pump & that maybe a larger fuel pump would fix it. Then I read you already had a 255L Wallbro.. mmm, I get it.

Reminds me of the time the radio lost & found announced: "Lost, a large brown lady's handbag". I always wondered that had they'd given a description of the handbag, then the large brown lady would stand a better chance of getting it back.

:)

haha very true thanks for the interest though........i'm going to hard wire it this weekend then Nistune time finally.....

Lol at the dangling modifier examples.

If you only changed fuel pumps, and not fuel pressure regulator, then you shouldn't have any issues - car should run just as before. I have the Walbro GSS341 as well (the 255l/h pump) and have never bothered to hard-wire it. Made no difference to the tune when installed. It has been running on a Nistune tune with a higher fuel pressure and larger injectors for a couple of years now without issues.

Lol at the dangling modifier examples.

If you only changed fuel pumps, and not fuel pressure regulator, then you shouldn't have any issues - car should run just as before. I have the Walbro GSS341 as well (the 255l/h pump) and have never bothered to hard-wire it. Made no difference to the tune when installed. It has been running on a Nistune tune with a higher fuel pressure and larger injectors for a couple of years now without issues.

I have seen it affect the tune many times, although other times it is fine. Just because you had no issues doesn't mean everyone will be fine, your car may have even been modified in Japan.

The Walbro's are usually problematic which is why I suggest hard wiring them, as that rules out any issues.

I hard wired the pump on Sunday and has fixed the problem........for the $50 worth of parts and 1h of my time well worth doing ......

Only thing when doing the mod was making sure you cut the right wires and put the right wire in the right spot on the Relay other than that pretty easy to do.......

Just keep a couple of spare Fuses in the car and your all good...

In case anyone else is interested in doing this mod the 2 wires leading to the fuel pump were Black /yellow + and purple -....there were 5 wires going to the top of the fuel tank the 2 pin plug is the one going to the fuel pump and those 2 wires were thicker than the rest so made sense.....

thanks for your help people......

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Please use a modern ECU. PowerFC with the Nintendo Gameboy controller is horrible. It's not 2005 anymore.
    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
×
×
  • Create New...