Jump to content
SAU Community

Recommended Posts

Recently i was getting some squeeling from loose belts on cold startups, so i got under the car and tightened the bolt, unbeknown that it was the wrong one. I later had a look and realised it was the alternator belt that was slipping. So i tightened the belt tensioner bolt on the alternator.. Squeeling fixed.

But, the bolt under the car, for the big belt.. not sure what it runs, is fairly tight.

How tight is too tight? I can push the belt a few mm, but other than that its very tight.

I tried undoing the bolt, which is how you loosen the belt, but it just screws out without moving the adjustor wheel.

Link to comment
https://www.sau.com.au/forums/topic/41198-fan-belt-tightness/
Share on other sites

Its part of the alternator you cant miss it, just look and youll see it, the bolt is facing the body of the car not the engine. Its attached to a metal slide kind of thing so when you tighten or loosen the bolt... it pulls/pushes the alternator towards or away from the engine hence tightening the belt

Recently i was getting some squeeling from loose belts on cold startups, so i got under the car and tightened the bolt, unbeknown that it was the wrong one. I later had a look and realised it was the alternator belt that was slipping. So i tightened the belt tensioner bolt on the alternator.. Squeeling fixed.

But, the bolt under the car, for the big belt.. not sure what it runs, is fairly tight.  

How tight is too tight? I can push the belt a few mm, but other than that its very tight.

I tried undoing the bolt, which is how you loosen the belt, but it just screws out without moving the adjustor wheel.

tighten the belt until you have 5-7mm deflection on its longest run between pulleys

Sumo: YOU are right. the only thing is that I CANNOT undo that bolt!!! it's so farken hard stuck in!!! that bolt is screwed in from the rear of car to front of car, so to undo it you go anticlockwise from the rear looking to the front, i am lifting the spanner instead of pusing down! right? it will not budge!

  • 1 month later...
  • 1 year later...
Recently i was getting some squeeling from loose belts on cold startups, so i got under the car and tightened the bolt, unbeknown that it was the wrong one. I later had a look and realised it was the alternator belt that was slipping. So i tightened the belt tensioner bolt on the alternator.. Squeeling fixed.

But, the bolt under the car, for the big belt.. not sure what it runs, is fairly tight.

How tight is too tight? I can push the belt a few mm, but other than that its very tight.

I tried undoing the bolt, which is how you loosen the belt, but it just screws out without moving the adjustor wheel.

hello,there

I am sorry that I don't know any mechanical stuff but i am having squeeling noises from what i suspect to be the fan belts. This is because this happened as soon as I had the fan belts changed last week.

can anyone kindly post photos or diagrams of where the related bolts are to be tightened? thank you,everyone.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
    • Sounds good, we will aim to be there! @The Bogan I'll give you a shout if you are heading up to campbelltown for the meet too.
    • Before I get to the test day, just to finish off the android head unit. This is a demo from car start up....the standard/host system takes a few seconds to boot (same as all v37) but Android comes up quickly. In this vid I'm using the delivered launcher but have set the default to Agami since which is easier to navigate when if use primarily 5 apps. You can see the host system still takes over when required eg putting it in reverse, and you can switch between Android and not by holding the back button 3 sec. It is pretty responsive (fast) but you can see I had to press harder than expected a couple of times.  I still have the phone connected to the stock system, and that also seamlessly takes over Android music playing. v37-android-demo.mp4 The bigger reason that I put this in though is so that I can use Ecutek directly on the head unit. That gives me a dash with logging (up to 20MB only), high and low value warnings on any parameter etc etc. I've run a USB cable from the Ecutek OBD dongle to a USB input on the unit, easy. v37-ecutek-demo.mp4   The unit did freeze on the launcher the other day, I think Agami was trying to verify the license when it didn't have a data connection...will monitor and report back if there are any other problems but so far I'm very happy with the upgrade.
    • Nah that is just crappy GPS mapping, I did have a small excursion (cold tyres, damp track, surprise!), will post up that when I get a chance.
×
×
  • Create New...