Jump to content
SAU Community

Recommended Posts

Hello Skyliners

For sale are my BBS Challenger 19 inch rims coming off an R32 Skyline GTR Vspec (Brembo brakes)

Selling due to moving to smaller and lighter wheels for track and the rims being staggered which isn't good for ATTESSA..my loss is your gain!!!

Rims are BBS Challenger

Stud pattern is 5x 114.3

Front : 19x 8.5 CH004 (BBS reference), Tyres are Zeetex 245/35/ZR19

Rear: 19 x 9.5 CH005 (BBS reference), Tyres are Zeetex 275/35/ZR19

I don't know the offset as the rims came with the car when I bought it but they sit very nicely and fill the guards as per the photos...there's no scrubbing at all and my guards aren't rolled. I do have some camber though : )

No major gutter rash but have very very slight scratch on one rim which can't be seen unless you look very very hard previous owners fault.

Price $2900 but slightly negotiable

Give me a call- Dennis 0400370477 or sms as i'm at work most of the time or email at [email protected]

Would prefer pick up in Victoria (South East suburbs please) or if you can organise postage i'm happy to drop them off or have a courier pick them up.

Thanks For Looking

D.post-32632-0-75734200-1351045976_thumb.jpgpost-32632-0-45443900-1351045987_thumb.jpgpost-32632-0-46245700-1351045994_thumb.jpgpost-32632-0-84400600-1351046003_thumb.jpgpost-32632-0-39101400-1351046014_thumb.jpg

I've found the offsets!

Front +35

Rear +40

These are Genuine BBS Rims.....need to get rid of em as I now have Advans to replace em...Price Drop $2500

Cheers.

Hi Mate tyres are still on the rims just had a quick look when I posted the ad as ive changed rims after a week of picking up the car (staggered setup not a good idea in a GTR) but after closer inspection rear tyres are Achilles ATR sport 275/30/ZR19 and fronts are Zeetex HP102 245/35ZR19 all tyres are brand spankin new

Cheers

  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
×
×
  • Create New...