Jump to content
SAU Community

Recommended Posts

hey guys

im in the works of planning a 25/34 build to go into my 34 GTT, im sourcing parts prices etc but one thing that im questioning is the neo head. Ive built a 25/30 for my 32 using a 33 series 2 head which i got the water gallery welded, and a external oil feed for the lifters is the neo head requiring the same work? im sure the water gallery has to be welded but is there anything different between a neo head opposed to the 33 head that needs to be addressed for this conversion??

thanks

Link to comment
https://www.sau.com.au/forums/topic/412621-rb2534/
Share on other sites

would it be worth using a 33 series 2 head? i assume the majority of the 34 wiring harness is the same as the 33?

i had a 25/30 in my 32 originally had a 25 in it, and when i got it tuned the tuners said it had a 34 wiring harness

Link to comment
https://www.sau.com.au/forums/topic/412621-rb2534/#findComment-6602374
Share on other sites

would it be worth using a 33 series 2 head? i assume the majority of the 34 wiring harness is the same as the 33?

i had a 25/30 in my 32 originally had a 25 in it, and when i got it tuned the tuners said it had a 34 wiring harness

34 head is far better, just allow for the 34 when choosing pistons etc.

Link to comment
https://www.sau.com.au/forums/topic/412621-rb2534/#findComment-6602518
Share on other sites

what do you mean by allow for the 34?

What Jonathon said - the Neo head has a smaller combustion chamber than the R33 so you need to take that into account when calculating your compression ratio. Should be fine with the extra capacity of the 3.4 block - Neo is the superior head. Look forward to seeing the result!
Link to comment
https://www.sau.com.au/forums/topic/412621-rb2534/#findComment-6603125
Share on other sites

The lifters will be fine. Just use the correct oil restrictors. We converted our r33 s2 head to solids and I made two 1.1mm restrictors using m8 grub screws. Has worked fine so far. This is on a spool rb34 stroker also.

As they said already you just need to cc your chambers and get the pistons to suit so your compression doesnt go sky high. Otherwise no worries!

Be prepared for a nice fat torque and power curve. From our old rb30 our whole power curve moved to the left by a good 1000rpm and we picked up something like 160hp more through the midrange. Makes the car so much nicer to drive.

Link to comment
https://www.sau.com.au/forums/topic/412621-rb2534/#findComment-6607090
Share on other sites

what is the approximate additional cost in block prep to fit the 34 crank in? the spool site mentions there is some minor modifications required to make it fit.

i'm looking at a 26/34 conversion into my 32 GTR down the track (when i get the $$ for it) was weighing up a 2.8 stroker but leaning towards going all out with the 34 since im more looking at low end torque and dont want to wait till 4.5k rpm for boost.

Link to comment
https://www.sau.com.au/forums/topic/412621-rb2534/#findComment-6608666
Share on other sites

ahhh ok that makes sense im getting a spool kit for my build, out of curiosity what did you set your compression ratio at?

thinking of using a JUN pump

Mine is a bargain basement build with stock pistons resulting in about 8.2:1 CR :/

As yours will be fully forged etc something well north of 9:1 or even more if you are going to run E85 would be good!

I have an N1 pump but don't limiter bash and have 7000 max rpm.

Jun sounds good - Tomei may be better but people swear by Nitto pumps - no experience of them myself!!

Link to comment
https://www.sau.com.au/forums/topic/412621-rb2534/#findComment-6608779
Share on other sites

what is the approximate additional cost in block prep to fit the 34 crank in? the spool site mentions there is some minor modifications required to make it fit.

i'm looking at a 26/34 conversion into my 32 GTR down the track (when i get the $$ for it) was weighing up a 2.8 stroker but leaning towards going all out with the 34 since im more looking at low end torque and dont want to wait till 4.5k rpm for boost.

The pictures on their site show a small amount ground away for the extra clearance needed for the 3.4 - looks like a very small job - less than 15min labour.

Go the 34 - I want to see more results!!

Link to comment
https://www.sau.com.au/forums/topic/412621-rb2534/#findComment-6608781
Share on other sites

The pictures on their site show a small amount ground away for the extra clearance needed for the 3.4 - looks like a very small job - less than 15min labour.

Go the 34 - I want to see more results!!

spool RB32 don't need any clearance and unlike the nitto RB32 stroker the spool on is a 3.2l
Link to comment
https://www.sau.com.au/forums/topic/412621-rb2534/#findComment-6608872
Share on other sites

spool RB32 don't need any clearance

So? The extra capacity of the 3.4 comes from a longer stroke. Longer stroke means a larger diameter crank, which naturally needs more room to spin around.... What's your point?

Link to comment
https://www.sau.com.au/forums/topic/412621-rb2534/#findComment-6609218
Share on other sites

So? The extra capacity of the 3.4 comes from a longer stroke. Longer stroke means a larger diameter crank, which naturally needs more room to spin around.... What's your point?

was just saying some people don't like machining the block for Clearance as it weakness the block a bit Edited by MRHD66
Link to comment
https://www.sau.com.au/forums/topic/412621-rb2534/#findComment-6609521
Share on other sites

It will be interesting to see more results, I've only ever come across the spool s15 dyno graph. It's a good thing. Is there any other 3.4L results you guy know of?

I like the idea of the 3.4, considering its really the same cost as going 2.8 from a rb26, obviously exept the mods to fit an rb 30 in your car.

What rpm are you looking to turn this to?

Link to comment
https://www.sau.com.au/forums/topic/412621-rb2534/#findComment-6611019
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...