Jump to content
SAU Community

Recommended Posts

Zennon headlights bit of damage still good though $600 for the pair

Door's front rear complete $350 each ono probably willing to split these up i.e window regs, door switches etc

Rear bar $200ono

Front bar with lower lip $320

Carbon bonnet $600ono

Blitz turnflow intercooler kit $650

HKS SSQ blow off valve $100

Blitz Air Filter $150

front guards $100 each

Kakimoto Cat back exhaust $650

Decat pipe $50

Front Cut no hanging panels,lights or Radiator $4,200 appears to be R33 engine will include tailshaft $4,200

or will split up

Manual Conversion with aftermarket clutch still have to check it out $3,000

R33 S1 engine package no turbo $1400

R33 rb25det turbo $350

also rear craddle with mech lsd $1,000 NA rear end

East bear recliner with R34 rail offers

got many other parts

pm reply sms or call me on 0422610771 if theres anything else you need

post-15018-0-97016900-1351762494_thumb.jpg

post-15018-0-84537500-1351762509_thumb.jpg

post-15018-0-78225400-1351762524_thumb.jpg

post-15018-0-71287100-1351762539_thumb.jpg

post-15018-0-01893000-1351762555_thumb.jpg

post-15018-0-26330100-1351762571_thumb.jpg

post-15018-0-84774500-1351762586_thumb.jpg

post-15018-0-61781500-1351762604_thumb.jpg

post-15018-0-73339400-1351762619_thumb.jpg

post-15018-0-32763500-1351762635_thumb.jpg

post-15018-0-92498300-1351762649_thumb.jpg

post-15018-0-06882800-1351762665_thumb.jpg

post-15018-0-24362800-1351762680_thumb.jpg

post-15018-0-79688100-1351762694_thumb.jpg

post-15018-0-41566000-1351763221_thumb.jpg

post-15018-0-83040300-1351763315_thumb.jpg

post-15018-0-82367300-1351763367_thumb.jpg

post-15018-0-62925000-1351763382_thumb.jpg

post-15018-0-73368100-1351763403_thumb.jpg

post-15018-0-86225200-1351763423_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/412846-wrecking-r34-4-door/
Share on other sites

  • 4 weeks later...
  • 1 month later...

· R34 Xennonon head lights $500 pair as some damage to the housings

· R34 4 door tail lights $100 each

· R34 front bar Indicators $40 each

· R34Dash wit hall vents $300

· R34 Carbon bonnet some damage cracks etc $400

· R34 4 door Boot lid with no spoiler or holes $250

· R34 4 complete doors $250 each

· R34 Bare front cut shell $500

· R34 Front guards $120 each

· NA R34 Front bumper with custom lip $150

· R34 Kakimoto cat back exhaust $500

· R34 Non abs rear cradle no diff all factory arms $500

· R34 2 way diff $700

· R33 Series 2 power fc

· R33 Series 2 rb25 complete engine package $1500 loom ecu afm turbo (no gearbox)

· Apexi copper radiator $350

· R34 manual conversion $2800

· Nismo R34 boss kit and steering wheel $250

· Almost new R34 CUSCO coilovers $950

· R34 Cusco front & rear sway bars $595

· R34 Red east bear recyclable on drivers rail $550

· R34 Std passenger $100 and rear seat $100

· Full set of R33 GTR rims tyres are bald $800

pricing updated bump

Which cusco coils are these, and will they fit the R34 coupe?

Do you have:

  • Armrest centre console lid - my hinge is half snapped

  • Need a new rear driver-side speaker mesh cover in the back, the ones that are on the parcel shelf at the back - Haven't checked if this is removable by itself, so if not, may need an entirely new parcel shelf
  • Driver side rain shield - the clear red colour piece of plastic

Also i'm in sydney nsw so will need postage....but give me a quote after we decide what you have/what i want

Thanks

  • 2 weeks later...

R34 mech lsd $700

Carbon bonnet $400

Apexi Rad $350

S2 R33 RB25det engine package loom ecu afm no gearbox $1500

R34 4 Door Manual convo kit with exedy clutch $2300

HKS turbo timer $50

R34 4 door na front bar with lip $150

R33 s2 power fc no hc $700

R34 castor rods good bushes $100 the pair

AGAIN SMS AS NOT ON HERE MUCH

0422610771

post-15018-0-72931800-1359447859_thumb.jpg

post-15018-0-70664000-1359447865_thumb.jpg

post-15018-0-34002000-1359447875_thumb.jpg

post-15018-0-74450800-1359447890_thumb.jpg

post-15018-0-69270300-1359447901_thumb.jpg

post-15018-0-02574300-1359447912_thumb.jpg

post-15018-0-60813700-1359447923_thumb.jpg

post-15018-0-60338600-1359447931_thumb.jpg

post-15018-0-99497000-1359447938_thumb.jpg

post-15018-0-87316200-1359447953_thumb.jpg

Edited by 1400r

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...