Jump to content
SAU Community

Recommended Posts

THE LAST DECA OF THE YEAR.

AND ALWAYS THE BIG ONE...

So once again we ask for your assistance

For this event to run SMOOTH on TIME and SAFELY we need a small group of volunteers (Officials )

to help run the day. With out the help of volunteers we can not run these days.

Officials are needed in 3 sections in the morning and 1 section in the afternoon.

All Officials on the day will be supplied with drinks and lunch.

An Officials breifing will be held before the Drivers breifing so all volunteer Officials will need to

be at the DECA complex by 8.30 am on the Saturday morning the 8th December

So if your thinking about coming up for a look and not competing this is a great way to get up close

to the action.

Also if your competing and bringing a friend or 3 it would be great if they could put there hand up

to help out on the day.

So if this sounds like you or your friends post up in here or PM me and i will will put you on the list.

Cheers WayneO.

MORNING

SKIDPAN

STARTER...Wayne ..RCHOO

TIMMER......Clive

FINISHER....Damian

MINI WANG..?

STARTER.....Campbell

TIMMER.......Kieran

FINISHER.... Daniel

MARSHAL...

LONG WANG

STARTER... Anna

TIMMER......Luke

FINISHER....Trent

SPOTTER 1 ..Stuart

SPOTTER 2..

SPARE..

AFTERNOON

SKIDPAN

STARTER.... Wayne.....RCHOO

TIMMER........

TIMMER,,,

FINISHER

FINISHER

imagezjf.gif

Link to comment
https://www.sau.com.au/forums/topic/413259-deca-officials-volunteers/
Share on other sites

I think there would only be a few stops left on the entry list or if not already full.

I know we have 1 motel booked solid and another filling fast.

So unless we get volunteer officials this will all be a waste of time..

So lets go people .

THE LAST DECA OF THE YEAR.

AND ALWAYS THE BIG ONE...

So once again we ask for your assistance

For this event to run SMOOTH on TIME and SAFELY we need a small group of volunteers (Officials )

to help run the day. With out the help of volunteers we can not run these days.

Officials are needed in 3 sections in the morning and 1 section in the afternoon.

All Officials on the day will be supplied with drinks and lunch.

An Officials breifing will be held before the Drivers breifing so all volunteer Officials will need to

be at the DECA complex by 8.30 am on the Saturday morning the 8th December

So if your thinking about coming up for a look and not competing this is a great way to get up close

to the action.

Also if your competing and bringing a friend or 3 it would be great if they could put there hand up

to help out on the day.

So if this sounds like you or your friends post up in here or PM me and i will will put you on the list.

Cheers WayneO.

MORNING

SKIDPAN

STARTER...Wayne ..RCHOO

TIMMER......Clive

FINISHER....Damian

MINI WANG..?

STARTER.....Campbell

TIMMER.......Kieran

FINISHER.... Daniel

MARSHAL...

LONG WANG

STARTER... Anna

TIMMER......Luke

FINISHER....Trent

SPOTTER 1 ..Stuart

SPOTTER 2.. Michael

SPARE..

AFTERNOON

SKIDPAN

STARTER.... Wayne.....RCHOO

TIMMER........

TIMMER,,,

FINISHER

FINISHER

imagezjf.gif

It still would be nice to see a few more people putting there hand up to help.

can never have enough incase some dont turn up..

Cheers Guys

Not sure if Bec has talked to you about me? As I've not heard anything from her.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Maybe it's time for a M3 F80 LCI, and leave it stock.  Drive it to a shop, sip on your latte with nutmeg whilst it gets serviced and on the way home swing by and grab some chai mix for the evening.
    • Great work! Thanks for documenting the process.
    • How would you even adjust the clutch if the pedal already has the correct free play? The operating cylinder has no adjustment in mounting position or rod length. On pull style clutches there is also no ability to adjust the bearing carrier. Push type I can see how adjusting the carrier height makes it all work.   If this is the twin plate clutch did you verify that your friction disks were oriented correctly? It's not mentioned in the directions at all you just have to notice that one side the friction disks have a part number on the hub fingers and a subtle coning to those fingers. Another thing that I noticed was if you put the friction disks in backwards the pressure plate fingers will not be even and flat when the clutch is installed.
    • yeah, mechanically, it is probably do-able, off the top of my head, there would be the transfer case, which I believe will bolt up to the rear of the RWD transmission, the shorter rear tail shaft. A front drive shaft, front diff, engine upper sump, front drive shafts, front hubs and front AWD struts (they are shaped around the front drive shafts), LCAs (at the very least from the front suspension) oil cooler.  You might want the rear diff from an AWD too, so you can be certain the front and rear diff rations are identical.  Who knows what brackets and mounts you might need.  So a whole doner car might be the best option if you need to maintain RHD. Then actually making it work, that would be a whole different story.
×
×
  • Create New...