Jump to content
SAU Community

Favour - Borrow Some R32 Coilpacks That Are Known To Work


Recommended Posts

I'm in a bit of a bind, I have new coilpacks and a miss fire at 4000rpm that screams coilpacks. Does anybody SE have a spare set of known to be working r32 coils I could chuck in to test?

*sigh*

I'm in a bit of a bind, I have new coilpacks and a miss fire at 4000rpm that screams coilpacks. Does anybody SE have a spare set of known to be working r32 coils I could chuck in to test?

*sigh*

I got my stockies but they were misfiring after a long drive :(

I'm sure some of them would still be good although not sure which one...

Let me know

Could it possibly be the coilpack loom? I've known a few times this to be the cause too

They go all hard a crispy after heating up so much after time, and some of the clips break etc

Told Dave to check it few times, he said it's basically at same age as his coilpacks which is a year old or so.

Think he's trying bcpre7s plugs next.

Your problem may well lie somewhere here. 7s are possibly too cold, try some 6s.

He's having issues with 6s at the moment gapped with 0.8mm

He had 1.1 gap that was misfiring, changed to 0.8, same story.

He've tried another coilpacks, igniter to no avail. Dave has put up a thread on forced induction with detailed problem.

Yeah i'm not trying to be difficult and be obscure, there is another thread (although i'm open to more ideas tbh this is killing me).

It's a misfire at 4000rpm under load when hot. Boost is 14psi. Car has been running fine, misfire appeared towards end of 5000km service interval so I assumed it was just old plugs which were 1.1 gapped. After replacing with 0.8mm gap it hasn't gone away.

It definitely isn't coilpacks, igniter. I am confident it isn't the loom it's new and not old and shitty like many I have owned that I had troubles with.

Gap, can try going back to 1.1 except everyone is certain that 0.8 should reduce misfire problems...

So that leaves me with fuel pressure (I have an 044 intank which could have packed up and given up, they arent' meant to be mounted intank). My workshop has recommended i check the pressure at idle.

Charge air measurement (haven't had any issues with these AFM yet but it could be one of them being a prick). I can check this with consult.

if it isn't those two things, i'm scared, and out of ideas ;). Thanks for your all your suggestions.

i only had misfire when car was hot and revving above 4000rpm. Just like how you described. Removed coilpacks, inspected and looked visually fine. (no cracks etc). Mechanics were telling me its not coilpacks either.

Ended up replacing with brand new splitfires and problem was gone.

Unless you have tested with a brand new set of coilpacks, i wouldnt rule them out just yet...

I tested with a set of splitfires from one of my other skylines that is currently driving around just fine. Not sure you can get a better test of coilpacks? Not only that but these coilpacks are literally new genuine nissan units... really hard to believe it is the coilpacks.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
    • KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
×
×
  • Create New...