Jump to content
SAU Community

Mishimoto Radiator (New In Box)

scotty nm35
 Share

Recommended Posts

scotty nm35 Grand Master

scotty nm35

Posted
Posted

I ordered a second 40mm G35 Mishimoto radiator when I got mine sent over from the US, mainly to keep shipping low. If anyone is interested I am looking for what it cost me landed, $530 plus shipping to you.

It fits V35 auto and manual including the thermo fan bolting straight up, and also the Stagea M35's, with slight trimming of the fibreglass around the cap.

I will be fitting mine this weekend so I will be able to talk you through installation if needed. I have already installed on into a V35 auto without dramas. Great quality dual pass core with a lifetime warranty, perfect for FI or track work.

post-63525-0-67106500-1353554935_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/414196-mishimoto-radiator-new-in-box/
Share on other sites
PN-Mad Grand Master

PN-Mad

Posted
Posted
I ordered a second 40mm G35 Mishimoto radiator when I got mine sent over from the US, mainly to keep shipping low. If anyone is interested I am looking for what it cost me landed, $530 plus shipping to you.

It fits V35 auto and manual including the thermo fan bolting straight up, and also the Stagea M35's, with slight trimming of the fibreglass around the cap.

I will be fitting mine this weekend so I will be able to talk you through installation if needed. I have already installed on into a V35 auto without dramas. Great quality dual pass core with a lifetime warranty, perfect for FI or track work.

I take teh pity.

I have one of these Rads. It is good quality, and lowers temps significantly.

  • 3 weeks later...
scotty nm35 Grand Master

scotty nm35

Posted
  • Author
Posted

Make an offer guys. :)

I have a brand new Nismo coppermix twin plate clutch for sale (PN: 3002A-RSZ30), arguably the best street clutch available for the VQ. It comes complete with new flywheel and bolts, throw out bearing, Nismo needle roller and stock bronze bush spigot bearings. RRP is $3300, looking for $2200.

I also have two 6spd manual 350z gearboxes available with low K's, one of which has a small hole in the case. (repairable or good for spares.) PM me if interested.

Going in a different direction and keeping the slush box.

post-63525-0-64035500-1355408183_thumb.jpg

post-63525-0-75837500-1355408200_thumb.jpg

post-63525-0-23805500-1355408218_thumb.jpg

post-63525-0-43027900-1355408240_thumb.jpg

DaveM35 Collaborator

DaveM35

Posted
Posted

Hey Scotty do you still have this radiator? I was putting some pennies aside to buy your dump pipe for my m35 and it was meant to be a b'day present to myself (15/12) but I noticed a coolant smell the day after and guess what my top tank has a crack below the filler neck :(

You say this one fits v35 auto/manual, but looking at pics it doesn't seem to have the cooler attachments, do u need to run a seperate auto cooler? If that's the case ill just try find a super cheapy e-bay for now, so cut I really wanted that pipe now!

bigkevracer Grand Master

bigkevracer

Posted
Posted

Yes Dave, you'll need a separate auto trans cooler. PM wagon_boy, he just replaced his and he might want to get rid of his old one (which is exactly the same B&M that I'm fitting shortly).

DaveM35 Collaborator

DaveM35

Posted
Posted

Cheers BigKev,

Appreciate the help, I reckon ill probably go the $300 eBay style for now, need the car safe to drive ASAP. Had $500 to spend on the dump so i thought if i could have picked up the mishi without needing extras that would be worth it. Really want to finish the exhaust system first before other mods, just fitted a Kakimoto-R cat back.

scotty nm35 Grand Master

scotty nm35

Posted
  • Author
Posted

The mishimoto has trans cooler fittings built in, at least the last two I bought did. Would you like me to check?

That said, a secondary trans cooler is suggested when you start modding...

bigkevracer Grand Master

bigkevracer

Posted
Posted

The mishimoto has trans cooler fittings built in, at least the last two I bought did. Would you like me to check?

That said, a secondary trans cooler is suggested when you start modding...

You know that's funny, mine has what I thought were trams cooler fittings too, but Mishi say manual only...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • MBS206
      Cas issue

      By MBS206 · Posted

      It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • nash47
      Cas issue

      By nash47 · Posted

      Yes sir am asking is there possible way from aem tuner from wiring pins 
    • MBS206
      Cas issue

      By MBS206 · Posted

      Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...