Jump to content
SAU Community

Recommended Posts

Hi John

I've meet you few times at UAS, John told me about this thread, will be good to see how this car progresses, subsribed

I'm a big fan of the blue front bar in the above video... Do you know who makes it?

It is a custom bar that was made by Phil Coles ( who drove the combined touring car ) and the guys at BSM for this car when it was still racing in IPRA

Marko... It's called a safety factor. The goal was to run about 400rwkw @ 20psi as a run in tune.

The car is getting completely rewired mid - late January and then I want to get it out for some practice runs...

your saftey factor results in 440kw...... F@$k'n AWESOME

Having gone through another few projects in the past and "trying" to keep control of the costs, my aim was to try and get about 400rwkw at 20psi as we think this should be "safe"... 440rwkw at about 23 psi is pretty good but I do not want to push the motor as it is a fresh rebuild.

I'll get it out for some private practice and get a few kms then we might look at whatever the restrictions are and then push a bit harder. The turbo should be good for around 900hp at the flywheel?

  • Like 1

Tune on BP98?

Its running Caltex e-flex E85 fuel but a lot of people I talk to are running the United E85 from Rozelle in Sydney... not sure if this is a better fuel? Anyone?

ATM I believe the tune is quite conservative running on the richer side and not too much timing...

Thanks for the thread John am enjoying it.

Great work

It will hopefully get more interesting once I get it out for a run.

Here is the plan from here:

1. Get the car rewired and recheck the tune at UAS.

2. Take the car out for some practice

3. Sort out suspension need front & rear adjustable control arms, tie rods etc... do roll centres and try and fit 295s under the guards. (The car ran 265s alround when it ran the 1:35 at 2010 time attack)

4. Get the car down to Tune house on the 4WD dyno for a higher power tune and to check 4WD operation

5. Try and make it to Nissan/Datsun Nationals

6. Aero... Replace rear wing and setup proper under tray

7. Practice, practice practice

8. Get to World Time Attack in October!

Oh... and try to lose 15kgs in between...

Its running Caltex e-flex E85 fuel but a lot of people I talk to are running the United E85 from Rozelle in Sydney... not sure if this is a better fuel? Anyone?

ATM I believe the tune is quite conservative running on the richer side and not too much timing...

It will hopefully get more interesting once I get it out for a run.

Here is the plan from here:

1. Get the car rewired and recheck the tune at UAS.

2. Take the car out for some practice

3. Sort out suspension need front & rear adjustable control arms, tie rods etc... do roll centres and try and fit 295s under the guards. (The car ran 265s alround when it ran the 1:35 at 2010 time attack)

4. Get the car down to Tune house on the 4WD dyno for a higher power tune and to check 4WD operation

5. Try and make it to Nissan/Datsun Nationals

6. Aero... Replace rear wing and setup proper under tray

7. Practice, practice practice

8. Get to World Time Attack in October!

Oh... and try to lose 15kgs in between...

You should have no problem getting the 295s under the guards. I'm running 305x680x18 Pirelli slicks no problem.

What 4wd controller are you using?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...