Jump to content
SAU Community

Recommended Posts

did some electrical work on the weekend - always so time consuming because I've learnt the hard way over the years that taking shortcuts and rushing the job will always cause headaches down the track. So i spent two days installing my reverse camera, and installing the amp. See pics below:

1. Alpine PDX-V9 - this is a 5ch amp that will run my entire system. It has 4x100wrms and 1x500wrms but birth sheet shows a fair bit higher numbers. It should pack a punch. But not only that, it's smaller and about half the weight of the mono block it replaces. I love it. I mounted it under the floor for a clean stealthy install. Took the TV tuner and mounted it where the Bose amp used to be, and put the Alpine where the TV Tuner used to be. Used all stock brackets, no cutting or drilling - so 100% reversible (the best kind of mod).

IMG_1005-2.jpg

2. Even though it's a digital amp and runs a lot cooler than a traditional A/B amp - it's still a very enclosed location. Decided to install a little 12V computer cooling fan to extract heat from that compartment into the spare wheel cavity. It's hooked up to the remote wire so it comes on whenever the amp is on. Had to cut a hole in the plastic trim - but I reckon it looks pretty sweet and functional.

IMG_1006-1.jpg

IMG_1007.jpg

3. All hidden away from prying eyes and protected from flying boot fodder. . Maximum boot space. That's a win in my books!

(ignore spider grill thing - came with the car, and ironic because i'm hyper arachnophobic - that will be going once i decide on a new sub).

IMG_1009.jpg

R6n350GT :

When you go for the dyno, do a run with and without the plenum spacer in. I did a test on my car and actually lost 3-5 kw through the mid range with the spacer in at 6psi. Spacers are designed for NA cars, I'm not sure they provide a benefit when turbod. Test it out.

R6n350GT :

When you go for the dyno, do a run with and without the plenum spacer in. I did a test on my car and actually lost 3-5 kw through the mid range with the spacer in at 6psi. Spacers are designed for NA cars, I'm not sure they provide a benefit when turbod. Test it out.

I will do, wonder if i even have the old shorter bolts.. ? can i use longer bolts still ?

I thought g35driver had done dynos showing good for FI?

Cant wait to get it done !!

Turbo be arriving this week so its getting closer :)

Need to find guy that does custom piping in goldcoast

Yeah, I got told it was good for Fi too, bought one, and installed it on the dyno. Didn't gain shit, lost power.

You might be able to use those bolts, but you'll need to find some bolts for the middle 6.

What's the plan? Gt35 or t51?

Yeah, I got told it was good for Fi too, bought one, and installed it on the dyno. Didn't gain shit, lost power.

You might be able to use those bolts, but you'll need to find some bolts for the middle 6.

What's the plan? Gt35 or t51?

HKS 3037Kit but modified so FMIC and 3582 CHRA inside the 3037 housing

Fully built engine with S2 BC Cams

Nice.

will be interesting, but surprised you didn't go to a T3 housing. I think the 1.12 housing in the kit is T2 isn't it?

i was talking to scotty about that, seemed there would be alot of fab work changing adapters, making room etc and didnt want to risk it not fitting :/

There would be.

At the end of the day - it has a 60mm gate for excess pressure, and should have enough flow to keep the GT35 spinning at a decent rate.

Dyno graph when done please :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...